Panasonic TH-LB30NT, TH-LB20NT, PT-LB90NT Using WebBrowser, Accessing from the WebBrowser

Using WebBrowser (cont.)

Enabling JavaScript

If JavaScript has been set to disable, enable it.

1	Open <Internet Properties> window.
	Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].
2	Select [Security] and set the security level to [Default Level], or select [Custom
	Level] and check the [Enable] checkbox under [Active scripting].
Accessing from the WebBrowser
1	Click [WEB CONTROL] on the launcher.
	Or start up the WebBrowser, and enter the IP address set by the projector.

The WebBrowser starts up and the authentication window appears.

<Top window>

2

3

Enter the user name and the password.

Click [OK].

<Monitored information> window appears. (Next page)

•The default user mane and password settings are as follows:

User name: user1 (with user authority) / admin1 (administrator authority)

Password: panasonic (lower case) Depending on the model, no password is set.

•Administrator authority has full access to the all features. User authority has access to “monitor information”, “projector control” and “password change”. (User authority has no access to “Detailed setting”.)

•Password used in this page is for accessing the web control window. (See page 67) This password is different from the password set in page 56 for accessing a projector.

•The system locks for several minutes if an incorrect password is entered three times in succession.

•If you reset the configuration to the factory default or the state of purchase, the password is reset to “panasonic”. Change the password to an appropriate one.

•Make sure the password is as hard to guess as possible.

•Change the password periodically.

•If you have forgotten the password, perform [INITIALIZE] in the projector's network menu (See page 59), and set a new one in the “Password change” window of your WebBrowser. (See page 67)

•Panasonic Corporation and its affiliated companies never directly ask customers for their password. Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.

•The top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] + [R] keys for example to update the screen.

•Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting.

•It may take some moments for WebBrowser to start up.

61