Panasonic PT-F300U Connections, Before connection to the projector, Connecting example Computers

Page 19

Connections

Before connection to the projector

Read and follow the operating and connecting instructions of each peripheral device. The peripheral devices must be turned off.

Use cables that match each peripheral device to be connected.

If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase correction is effective.

Confirm the type of video signals. See “List of compatible signals” on page 52.

Connecting example: Computers

Computers

Monitor

 

Audio system

Computer for controlling

Getting Started

NOTE:

•Use COMPUTER terminals to input YPBPR signals.

•When connecting to the COMPUTER terminals, you can switch the audio input terminal between COMPUTER AUDIO IN and AUDIO IN. See “AUDIO SETTING” on page 42.

•When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.

•See CD-ROM contents for the LAN network connection.

LAN terminal

ACT lamp (Green)

Flashes when transmit data.

LINK lamp (Yellow)

Illuminates when a LAN cable (10 Base-T/100 Base-TX) is connected.

NOTE:

• Do not touch the metal parts of the LAN terminal. Failure to observe this may cause malfunction by static electricity.

ENGLISH - 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents PT-F300U Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Model Number PT-F300NTU /PT-F300U Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelPower cord AccessoriesPower cord secure lock Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forScreen size and throw distance Setting upCalculation methods Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power on function Switching the projector on/offPower cord ConnectingSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonProjecting an image Selecting the input signalPositioning the image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centered area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageLaser pointer beam emitter Shown as PT-F300NTU Using an assigned functionUsing the laser pointer Disable the Laser buttonControlling the volume of the speaker Main menu and Sub-menu Menu NavigationFilter Counter Reset Closed Caption SettingMenu Navigation Displaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock ON-SCREEN Display Closed Caption SettingDisplay Option menu DVI-DSxga Mode Auto SetupSignal Search Wide ModeOther Functions COMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusFunction Button InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-F300NTUonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementReplacing the Lamp unit Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalInstalling the safety cable Ceiling mount bracket safeguardsDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications Audio VideoOUT DVI-DTrademark acknowledgements DimensionsUnit mm Digital Cinema Reality Digital Zoom IndexIndex Picture ModeNuméro de modèle PT-F300NTU /PT-F300U Numéro de série Avis important concernant la sécuritéDéclaration de conformité Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardePrécautions lors du transport Précautions lors de linstallationPrécautions lors de lutilisation Affichage à cristaux liquides SécuritéComposants optiques Délai de remplacement de lUnité de la lampe Remplacement de lunité de la lampeAvant de remplacer le lUnité de la lampe Protections du support de montage au plafond Installation du câble de sécuritéRetirer et remplacer la lampe
Related manuals
Manual 72 pages 33.32 Kb

PTF300NTU, PT-F300U specifications

The Panasonic PT-F300U and PT-F300NTU are advanced projectors designed for a variety of commercial and educational applications, offering high-quality performance and innovative technology. With a focus on brightness, flexibility, and ease of use, these projectors stand out in their category.

One of the most notable features of the PT-F300U and PT-F300NTU is their exceptional brightness. With 3,000 lumens of brightness, these projectors ensure clear and vivid images even in well-lit environments. This makes them ideal for classrooms, conference rooms, and other venues where ambient light can be a challenge. The high brightness level allows users to present engaging visuals without compromising on image quality.

In terms of resolution, the PT-F300U and PT-F300NTU deliver native XGA (1024 x 768) resolution, providing clear and detailed images for a range of content. Whether displaying presentations, videos, or high-resolution graphics, these projectors maintain sharpness and clarity, enhancing the viewing experience.

These projectors incorporate advanced technology aimed at ensuring reliability and longevity. The Eco Filter technology extends the filter replacement cycle by up to 20,000 hours, reducing maintenance costs and downtime. This feature is particularly beneficial for organizations that require consistent use without frequent servicing.

Additionally, the PT-F300U and PT-F300NTU are designed with multiple connectivity options, including HDMI, VGA, and LAN, allowing for seamless integration with various devices. This versatility enables easy connection to laptops, tablets, and other multimedia sources, making them suitable for a wide range of presentations.

For users who value portability, the PT-F300NTU model features a compact design and lightweight build, making it easy to transport between locations. This is particularly advantageous for educators or business professionals who need to set up presentations in different venues.

Another key characteristic is the projectors’ 3LCD technology, which delivers bright and colorful images by utilizing three individual LCD panels for RGB color reproduction. This technology ensures that colors are rendered accurately, providing a more immersive viewing experience.

In conclusion, the Panasonic PT-F300U and PT-F300NTU projectors offer a seamless blend of brightness, image quality, and flexibility. With advanced technologies that enhance performance and reduce maintenance, these projectors are well-equipped to meet the demands of various environments, making them an excellent choice for both educational and professional settings.
Top Page Image Contents