Panasonic PTF300NTU, PT-F300U manual Switching the input signal, Enlarging the centered area

Page 26

Remote control operation

Switching the input signal

You can switch the input method manually by pressing the COMPUTER, NETWORK and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while.

The graphical guidance will be displayed on the upper right of the projected image and you can confirm the selected input method which is highlighted in yellow. See “INPUT GUIDE” on page 38.

NOTE:

•If you select an unplugged input method, the guidance will blink on and off several times.

•See “List of compatible signals” on page 52.

•See “Connections” on page 19.

Pressing the COMPUTER button

COMPUTER1

H

COMPUTER2

F

 

G

 

 

 

 

 

 

 

DVI

 

 

NOTE:

•Only when the COMPUTER2 SELECT is set to INPUT, the COMPUTER2 is selectable.

Pressing the NETWORK button

Only for the network connection operation. See CD- ROM contents for more detailed information.

Pressing the VIDEO button

VIDEO

IH

S-VIDEO

Pressing the INPUT SELECT button on the projector

Basic Operation

COMPUTER1

H

COMPUTER2

F

 

G

 

 

 

DVI

 

S-VIDEO

 

 

 

F

 

G

 

 

 

NETWORK

I

VIDEO

Enlarging the centered area

You can enlarge the projected image down to a centered area for emphasizing within the range of 1x to 2x.

Enlarging the image

Shifting the center point

1. Press the DIGITAL ZOOM +/- button once.

Press F G I H to shift the center point.

The centered area of the image will then be enlarged to 1.5x.

2. Adjust the image size by pressing the DIGITAL ZOOM +/- button.

The image size will be changed in steps of 0.1.

NOTE:

•When the COMPUTER signal is projected, the enlargement range will be changed to 1x to 3x. When the FRAME LOCK in POSITION menu is set to ON, the enlargement range is 1x to 2x. See “FRAME LOCK” on page 37.

•When the input signal is changed while the DIGITAL ZOOM is activated, the DIGITAL ZOOM will be cancelled.

•While DIGITAL ZOOM is activated, FREEZE is not available.

ENGLISH - 26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents PT-F300U Important Safety Notice Dear Panasonic CustomerModel Number PT-F300NTU /PT-F300U Trade Name Important Safety NoticeDeclaration of Conformity PanasonicContents Contents SettingsMaintenance AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Use only the specified batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Do not mix old and new batteriesLiquid crystal panel SecurityOrder to get the best picture quality Optical componentsPower cord secure lock AccessoriesPower cord Minimum required setting screen Read this firstTop and front view About Your ProjectorProjector body Control panelSecurity lock Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Lamp unit compartment Air exhaust portCLOCK, Clock Phase and Signal Search for Remote controlAttaching a hand strap Top view Remote control indicator Battery compartmentCalculation methods Setting upScreen size and throw distance Projection method Front leg adjusters and throwing angleSetting up Mounting on the ceiling and projecting from frontHorizontal shift Adjusting the lens shift leverLens shift and positioning Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Before connection to the projector Connecting example ComputersConnections LAN terminalConnecting with DVI-D Connecting example AV equipmentConnecting with Video IN/S-VIDEO ConnectionsConnecting Switching the projector on/offPower cord Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch the Main Power on Press the power button Switching on the projectorSwitching off the projector Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Operating range Remote control operationSetting up the image position automatically Facing to the projectorSwitching the input signal Enlarging the centered areaCapturing an image Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Stopping the projectionDisable the Laser button Using an assigned functionUsing the laser pointer Laser pointer beam emitter Shown as PT-F300NTUControlling the volume of the speaker Menu Navigation Main menu and Sub-menuMenu Navigation Closed Caption SettingFilter Counter Reset Navigating through the menu Adjusting with the bar scale itemsOperating procedure Displaying the Main menuPicture menu Digital Cinema Reality Color TemperatureDaylight View TV-SYSTEMPosition menu Aspect ratio options AspectPosition menu 169Frame Lock DVI-D Closed Caption SettingDisplay Option menu ON-SCREEN DisplayWide Mode Auto SetupSignal Search Sxga ModeOther Functions Status Projector Setup menuNo Signal SHUT-OFF COMPUTER2 SelectAudio Setting InstallationHigh Altitude Mode Function ButtonInitialize ALL Filter Counter ResetTest Pattern Remaining Filter of Status in ProjectorSecurity menu PasswordPassword Change Text DisplayMenu Lock Menu Lock PasswordControl Device Setup Security menuItems in Network menu Wireless LAN PT-F300NTUonlyNetwork menu Network menu, the following items are availableLamp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector When to replace the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure Before replacing the ACFTurn the projector upside down and place it gently Resetting the RemainingCounter Reset in Projector Setup On a soft clothTroubleshooting Quality*2 List of compatible signalsTechnical Information KHz MHzSerial terminal Computer connection guidance Technical Information Cable specificationsControl commands ProjectorInput signal Lamp switchingSwitching input Signals Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable Screen size and throw distance for 169 aspect ratio Specifications DVI-D VideoOUT AudioUnit mm DimensionsTrademark acknowledgements Index Digital Cinema Reality Digital ZoomPicture Mode IndexAvis important concernant la sécurité Numéro de modèle PT-F300NTU /PT-F300U Numéro de sérieAdvertencia Avis important concernant la sécuritéAvertissement Déclaration de conformitéPrécautions de sécurité AvertissementMises EN Garde Précautions de sécuritéPrécautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Composants optiques SécuritéAffichage à cristaux liquides Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond
Related manuals
Manual 72 pages 33.32 Kb

PTF300NTU, PT-F300U specifications

The Panasonic PT-F300U and PT-F300NTU are advanced projectors designed for a variety of commercial and educational applications, offering high-quality performance and innovative technology. With a focus on brightness, flexibility, and ease of use, these projectors stand out in their category.

One of the most notable features of the PT-F300U and PT-F300NTU is their exceptional brightness. With 3,000 lumens of brightness, these projectors ensure clear and vivid images even in well-lit environments. This makes them ideal for classrooms, conference rooms, and other venues where ambient light can be a challenge. The high brightness level allows users to present engaging visuals without compromising on image quality.

In terms of resolution, the PT-F300U and PT-F300NTU deliver native XGA (1024 x 768) resolution, providing clear and detailed images for a range of content. Whether displaying presentations, videos, or high-resolution graphics, these projectors maintain sharpness and clarity, enhancing the viewing experience.

These projectors incorporate advanced technology aimed at ensuring reliability and longevity. The Eco Filter technology extends the filter replacement cycle by up to 20,000 hours, reducing maintenance costs and downtime. This feature is particularly beneficial for organizations that require consistent use without frequent servicing.

Additionally, the PT-F300U and PT-F300NTU are designed with multiple connectivity options, including HDMI, VGA, and LAN, allowing for seamless integration with various devices. This versatility enables easy connection to laptops, tablets, and other multimedia sources, making them suitable for a wide range of presentations.

For users who value portability, the PT-F300NTU model features a compact design and lightweight build, making it easy to transport between locations. This is particularly advantageous for educators or business professionals who need to set up presentations in different venues.

Another key characteristic is the projectors’ 3LCD technology, which delivers bright and colorful images by utilizing three individual LCD panels for RGB color reproduction. This technology ensures that colors are rendered accurately, providing a more immersive viewing experience.

In conclusion, the Panasonic PT-F300U and PT-F300NTU projectors offer a seamless blend of brightness, image quality, and flexibility. With advanced technologies that enhance performance and reduce maintenance, these projectors are well-equipped to meet the demands of various environments, making them an excellent choice for both educational and professional settings.
Top Page Image Contents