Switching the projector on/off
Switching on the projector
Before switching on the projector, make sure the power cord and all the other devices are connected correctly. See “Connections” on page 17 and “Power cord” on page 18.
By control panel operation | By remote control operation |
Make sure CONTROL PANEL in OPTION menu is set to VALID. The POWER button is locked to prevent malfunction and the POWER LOCK indicator lights in red.
1. Press the RELEASE button.
The POWER LOCK indicator goes off. Without any operation in 10 seconds, the POWER button will be locked again.
2.Press the POWER button in 10 seconds.
The POWER button beeps once.
3.The POWER indicator flashes in green several times.
4.The POWER indicator lights in green and displays the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set to OFF, the startup logo will not be displayed. See “STARTUP LOGO” on page 34.
(1) (3 - 4)
RELEASE | INPUT SELECT | FUNCTION |
| ||
|
|
|
|
| |
| MENU | RETURN | |||
(1) (2)
1.Press the POWER button.
2.The POWER indicator flashes in green several times.
3.The POWER indicator lights in green and displays the startup logo for 30 seconds.
When the STARTUP LOGO in OPTION menu is set to OFF, the startup logo will not be displayed. See “STARTUP LOGO” on page 34.
(1)
(2 - 3)
By direct power on function
You can switch on the projector by connecting the power cord. See “Direct power on function” on page 18.
Basic Operation
NOTE:
•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector.
•When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational sound depends on the external temperature.
•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.
•Operating the control panel buttons with covered hand, such as plastered or gloved, may result in fail.