Panasonic PT-F300NTU, PT-F300U manual Switching the projector on/off, Power cord, Connecting

Page 21

Switching the projector on/off

Power cord

Connecting

Disconnecting

1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the power cord from the wall outlet.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4. Connect the power cord to a wall outlet.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.

Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Basic Operation

NOTE:

•Do not use other than the provided power cord.

•Ensure all the input devices are connected and turned off before connecting the power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

You can start the projection with only supplying the electric power. See “INITIAL START UP” on page 41.

Direct power off function

You can switch off the electric power supply any time by unplugging the power plug from the wall outlet or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

ENGLISH - 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents PT-F300U Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticeModel Number PT-F300NTU /PT-F300U Trade Name PanasonicContents Maintenance SettingsContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality SecurityLiquid crystal panel Optical componentsAccessories Power cordPower cord secure lock Read this first Minimum required setting screenProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Auto cleaning filter ACF Front leg Adjusters CompartmentSecurity lock Lamp unit compartment Air exhaust portAttaching a hand strap Top view Remote control indicator Remote controlCLOCK, Clock Phase and Signal Search for Battery compartmentSetting up Screen size and throw distanceCalculation methods Setting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift leverHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting with DVI-D ConnectionsPower cord Switching the projector on/offConnecting Direct power on functionPower indicator Switching the projector on/offPower indicator informs you the status of the power Switching off the projector Switching on the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorSelecting the input signal Projecting an imagePositioning the image Setting up the image position automatically Remote control operationOperating range Facing to the projectorEnlarging the centered area Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projectionUsing the laser pointer Using an assigned functionDisable the Laser button Laser pointer beam emitter Shown as PT-F300NTUControlling the volume of the speaker Main menu and Sub-menu Menu NavigationClosed Caption Setting Filter Counter ResetMenu Navigation Operating procedure Adjusting with the bar scale itemsNavigating through the menu Displaying the Main menuPicture menu Daylight View Color TemperatureDigital Cinema Reality TV-SYSTEMPosition menu Position menu AspectAspect ratio options 169Frame Lock Display Option menu Closed Caption SettingDVI-D ON-SCREEN DisplaySignal Search Auto SetupWide Mode Sxga ModeOther Functions No Signal SHUT-OFF Projector Setup menuStatus COMPUTER2 SelectHigh Altitude Mode InstallationAudio Setting Function ButtonTest Pattern Filter Counter ResetInitialize ALL Remaining Filter of Status in ProjectorPassword Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordMenu Lock Security menuNetwork menu Wireless LAN PT-F300NTUonlyItems in Network menu Network menu, the following items are availableManaging the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Care and Replacement Replacement procedure Replacing the Auto Cleaning Filter ACFWhen to replace the ACF Before replacing the ACFCounter Reset in Projector Setup Resetting the RemainingTurn the projector upside down and place it gently On a soft clothTroubleshooting Technical Information List of compatible signalsQuality*2 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalCeiling mount bracket safeguards Installing the safety cableDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications OUT VideoDVI-D AudioDimensions Trademark acknowledgementsUnit mm Digital Cinema Reality Digital Zoom IndexIndex Picture ModeNuméro de modèle PT-F300NTU /PT-F300U Numéro de série Avis important concernant la sécuritéAvertissement Avis important concernant la sécuritéAdvertencia Déclaration de conformitéAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardePrécautions lors de linstallation Précautions lors du transportPrécautions lors de lutilisation Sécurité Affichage à cristaux liquidesComposants optiques Remplacement de lunité de la lampe Délai de remplacement de lUnité de la lampeAvant de remplacer le lUnité de la lampe Installation du câble de sécurité Protections du support de montage au plafondRetirer et remplacer la lampe
Related manuals
Manual 72 pages 59.09 Kb

PT-F300NTU, PT-F300U specifications

The Panasonic PT-F300U and PT-F300NTU are advanced projectors designed for a variety of commercial and educational applications, offering high-quality performance and innovative technology. With a focus on brightness, flexibility, and ease of use, these projectors stand out in their category.

One of the most notable features of the PT-F300U and PT-F300NTU is their exceptional brightness. With 3,000 lumens of brightness, these projectors ensure clear and vivid images even in well-lit environments. This makes them ideal for classrooms, conference rooms, and other venues where ambient light can be a challenge. The high brightness level allows users to present engaging visuals without compromising on image quality.

In terms of resolution, the PT-F300U and PT-F300NTU deliver native XGA (1024 x 768) resolution, providing clear and detailed images for a range of content. Whether displaying presentations, videos, or high-resolution graphics, these projectors maintain sharpness and clarity, enhancing the viewing experience.

These projectors incorporate advanced technology aimed at ensuring reliability and longevity. The Eco Filter technology extends the filter replacement cycle by up to 20,000 hours, reducing maintenance costs and downtime. This feature is particularly beneficial for organizations that require consistent use without frequent servicing.

Additionally, the PT-F300U and PT-F300NTU are designed with multiple connectivity options, including HDMI, VGA, and LAN, allowing for seamless integration with various devices. This versatility enables easy connection to laptops, tablets, and other multimedia sources, making them suitable for a wide range of presentations.

For users who value portability, the PT-F300NTU model features a compact design and lightweight build, making it easy to transport between locations. This is particularly advantageous for educators or business professionals who need to set up presentations in different venues.

Another key characteristic is the projectors’ 3LCD technology, which delivers bright and colorful images by utilizing three individual LCD panels for RGB color reproduction. This technology ensures that colors are rendered accurately, providing a more immersive viewing experience.

In conclusion, the Panasonic PT-F300U and PT-F300NTU projectors offer a seamless blend of brightness, image quality, and flexibility. With advanced technologies that enhance performance and reduce maintenance, these projectors are well-equipped to meet the demands of various environments, making them an excellent choice for both educational and professional settings.
Top Page Image Contents