Panasonic PT-F300NTU, PT-F300U manual Switching on the projector, Switching off the projector

Page 23

Switching the projector on/off

Switching on the projector

1.

Switch the MAIN POWER on.

3. Press the power button.

 

The power indicator lights up in red.

The power indicator lights up in green after flashing

2.

Open the front panel cover.

for a while.

 

This is not necessary in remote control operation.

The STARTUP LOGO will be displayed on the

 

 

screen. See “STARTUP LOGO” on page 39.

NOTE:

•When starting up the projector, some small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector.

•When the internal cooling fan is operating, some operational sound may be heard. The loudness of the operational sound depends on the external temperature.

•If you disconnected the power cord or switched off the MAIN POWER while on projecting mode, the projection will start with connecting the power cord or switching on the MAIN POWER. See “INITIAL START UP” on page 41.

Switching off the projector

Basic Operation

1. Open the front panel cover.

This is not necessary in remote control operation.

2. Press the power button.

The confirmation screen is displayed. It will disappear and return to the projection after 10 seconds without any operation.

To return to the projection, press any button except the power button.

3. Press the power button.

The power indicator lights up in orange while cooling the lamp, then illuminates red when is ready to switch off the MAIN POWER.

4.Switch off the MAIN POWER on the back of the projector.

NOTE:

•You can disconnect the power cord or switch off the MAIN POWER instead of following this procedure. See “INITIAL START UP” on page 41.

ENGLISH - 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PT-F300U Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Model Number PT-F300NTU /PT-F300U Trade NameContents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelPower cord secure lock AccessoriesPower cord Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forCalculation methods Setting upScreen size and throw distance Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power on function Switching the projector on/offPower cord ConnectingPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonPositioning the image Selecting the input signalProjecting an image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centered area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageLaser pointer beam emitter Shown as PT-F300NTU Using an assigned functionUsing the laser pointer Disable the Laser buttonControlling the volume of the speaker Main menu and Sub-menu Menu NavigationMenu Navigation Closed Caption SettingFilter Counter Reset Displaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock ON-SCREEN Display Closed Caption SettingDisplay Option menu DVI-DSxga Mode Auto SetupSignal Search Wide ModeOther Functions COMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusFunction Button InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-F300NTUonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable Screen size and throw distance for 169 aspect ratio Specifications Audio VideoOUT DVI-DUnit mm DimensionsTrademark acknowledgements Digital Cinema Reality Digital Zoom IndexIndex Picture ModeNuméro de modèle PT-F300NTU /PT-F300U Numéro de série Avis important concernant la sécuritéDéclaration de conformité Avis important concernant la sécuritéAvertissement AdvertenciaAvertissement Précautions de sécuritéPrécautions de sécurité Mises EN GardePrécautions lors de lutilisation Précautions lors de linstallationPrécautions lors du transport Composants optiques SécuritéAffichage à cristaux liquides Avant de remplacer le lUnité de la lampe Remplacement de lunité de la lampeDélai de remplacement de lUnité de la lampe Retirer et remplacer la lampe Installation du câble de sécuritéProtections du support de montage au plafond
Related manuals
Manual 72 pages 59.09 Kb

PT-F300NTU, PT-F300U specifications

The Panasonic PT-F300U and PT-F300NTU are advanced projectors designed for a variety of commercial and educational applications, offering high-quality performance and innovative technology. With a focus on brightness, flexibility, and ease of use, these projectors stand out in their category.

One of the most notable features of the PT-F300U and PT-F300NTU is their exceptional brightness. With 3,000 lumens of brightness, these projectors ensure clear and vivid images even in well-lit environments. This makes them ideal for classrooms, conference rooms, and other venues where ambient light can be a challenge. The high brightness level allows users to present engaging visuals without compromising on image quality.

In terms of resolution, the PT-F300U and PT-F300NTU deliver native XGA (1024 x 768) resolution, providing clear and detailed images for a range of content. Whether displaying presentations, videos, or high-resolution graphics, these projectors maintain sharpness and clarity, enhancing the viewing experience.

These projectors incorporate advanced technology aimed at ensuring reliability and longevity. The Eco Filter technology extends the filter replacement cycle by up to 20,000 hours, reducing maintenance costs and downtime. This feature is particularly beneficial for organizations that require consistent use without frequent servicing.

Additionally, the PT-F300U and PT-F300NTU are designed with multiple connectivity options, including HDMI, VGA, and LAN, allowing for seamless integration with various devices. This versatility enables easy connection to laptops, tablets, and other multimedia sources, making them suitable for a wide range of presentations.

For users who value portability, the PT-F300NTU model features a compact design and lightweight build, making it easy to transport between locations. This is particularly advantageous for educators or business professionals who need to set up presentations in different venues.

Another key characteristic is the projectors’ 3LCD technology, which delivers bright and colorful images by utilizing three individual LCD panels for RGB color reproduction. This technology ensures that colors are rendered accurately, providing a more immersive viewing experience.

In conclusion, the Panasonic PT-F300U and PT-F300NTU projectors offer a seamless blend of brightness, image quality, and flexibility. With advanced technologies that enhance performance and reduce maintenance, these projectors are well-equipped to meet the demands of various environments, making them an excellent choice for both educational and professional settings.
Top Page Image Contents