First-time setup of your device
First-time setup of your device
Read the chapter "Important notes", Page 11.
The necessary hardware drivers and the supplied software for the device are already
Before you switch on the device for the first time, connect it to the mains voltage using the mains adapter, see "Mains adapter connecting", Page 16. The mains adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages can appear. The display may remain dark for a short time or may flicker.
Follow the instructions on the screen.
NEVER switch off your device during the
The battery is permanently installed in the system and must be charged if you want to use your device under battery operation.
When used on the move, the
Refer to chapter "Connecting external devices", Page 59 for instructions on how to connect external devices (e.g. mouse, flash storage) to your device.
Unpacking and checking the device
Should you discover any damage that occurred during transportation, notify your local sales outlet immediately!
►Unpack all the individual parts.
►Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
Fujitsu Technology Solutions | 15 |