Archos 101 manual Www Connecting to the Wifi, Settings screen, select Wireless & networks

ENGLISH

wwwCONNECTING TO THE WIFI

First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARCHOS is in range of a network that you have already configured once, it will attempt to make a connection.

1To configure a new WiFi network, go on the Home screen, tap on the Menu icon, then select Settings.

2In the Settings screen, select Wireless & networks.

3If the WiFi is off, tap on the Wi-Filine to turn it on. Then select Wi-Fi settings. The ARCHOS will scan for available WiFi networks and display them at the bottom of the screen.

Tap on the network you want to connect to.Then tap inside the Wireless password field to

4make the virtual keyboard appear.We recommend that you select Show password, to be able to see the characters you are typing.

Enter the required network information*, tap on Done, and then tap on Connect. Your

5ARCHOS will now attempt to establish a connection to that WiFi access point with the network parameters you entered.

*For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. Check with the person who manages the WiFi network to obtain the exact connection parameters required.

4► Consult the full Manual to learn more about the Internet configuration.

QSG_A10_IT_book_PN109852.indd 4 13/06/2011 16:46:06