Archos 101 manual Touchscreen Functioning, If you can access the Android interface

TOUCHSCREEN FUNCTIONING

When touchscreen functioning is impaired, you can recalibrate your touchscreen.

--If you can access the Android interface

1.In the device homescreen, tap on , then tap on Settings.

2.In the Settings screen, tap on Repair & Formatting at the bottom of the menu list.

3.In the Repair & Formatting screen, tap on Touchscreen Calibration. A message will tell you to put your ARCHOS down.

4.Put the device on a flat surface.

5.Tap on Calibrate the touchscreen.

The calibration of the touchscreen starts. Do not touch the product until the calibration is finished.

IMPORTANT: If you do not put the device on a flat surface (e.g. Table), the touchscreen calibration will not be successful.

--If you do not have access to the Android interface

1.When turning on the device, hold downand press . The ARCHOS Recovery screen is displayed.

Useto switch between options and to validate your selection.

2.Select Repair system and press .

3.In the Repair system screen, select Force touchscreen calibration and press .

4.Press again to confirm. And put your product on a flat surface.

The calibration of the touchscreen starts. Do not touch the product until the calibration is finished.

IMPORTANT: If you do not put the device on a flat surface (e.g. Table), the touchscreen calibration will not be successful.

5.At the end of the calibration, press . The ARCHOS Recovery screen is displayed.

6.Select No. Your device will reboot. The touchscreen is now recalibrated.

NOTE: For more information, Refer to the Need help chapter.

ENGLISH

7

QSG_A10_IT_book_PN109852.indd 7 13/06/2011 16:46:13