Dell Nov-39, 30-Nov manual

Option	Description
Wireless Radio Control	Allows you to enable or disable the feature that automatically switches
	from wired or wireless networks without depending on the physical
	connection.
	•	Control WLAN Radio
	•	Control WWAN Radio
	• Control WLAN radio or Control WWAN radio is not selected
		(default)
Wake on LAN/WLAN	Allows you to enable or disable the feature that powers on the
	computer from the Off state when triggered by a LAN signal.
	• Disabled: This option is enabled by default
	•	LAN Only
	•	WLAN Only
	•	LAN or WLAN
	• LAN with PXE Boot
Block Sleep	This option lets you block entering to sleep (S3 state) in Operating
	System environment.
	Block Sleep (S3 state) - This option is disabled by default.
Peak Shift	This option enables you to minimize the AC power consumption during
	the peak power times of day. After you enable this option, your system
	runs only in battery even if the AC is attached.
Advanced Battery Charge	This option enables you to maximize the battery health. By enabling this
Configuration	option, your system uses the standard charging algorithm and other
	techniques, during the non-work hours to improve the battery health.
	Disabled (default)
Primary Battery Charge	Allows you to select the charging mode for the battery. The options are:
Configuration	•	Adaptive
	•	Standard
	• ExpressCharge: This option is enabled by default.
	•	Primarily AC use
	•	Custom
	If Custom Charge is selected, you can also configure Custom Charge
	Start and Custom Charge Stop.
		NOTE: All charging mode may not be available for all the batteries.
		To enable this option, disable the Advanced Battery Charge
		Configuration option.
Intel Smart Connect	This option, if enabled, periodically senses the nearby wireless
Technology	connections, while the system is in sleep state. You can use this option
	to synchronize the email or other social media application that are
	open, when the system enters the sleep state.

51