Table of Contents, Features, Unpacking | Outlaw Audio 200 M-Block

3Model 200 M-Block Power Amplifier

3Features

3Unpacking

4Front Panel and Rear Panel

5Installation and Configuration

5Power Control Connections

5Speaker Wire Connections

6Model 200 Connection Diagram

7 Audio Signal Connections

7 AC Power Connection

7 Operation

8 Care and Maintenance

8Cleaning

8Troubleshooting Guide

8Protection Circuitry

8Fuse Replacement

8Outlaw Service Information

8Troubleshooting

9A Few Words About Hum and Noise

9Potential Ground Loops in a Complex A/V System

10 Specifications

11 The Outlaw Audio 30-Day Satisfaction Guarantee

11 Outlaw Audio Limited Warranty

The contents of this manual are Copyright © 2003 by Outlaw Audio, LLC and may not be duplicated or reproduced by any means, whether physical, electronic or otherwise without prior written consent from Outlaw Audio.

Specifications are those in effect at the time of printing. Outlaw Audio reserves the right to change specifications or designs at any time without notice or liability to modify or upgrade units previously sold.

Owner’s Manual

Unpacking

Model 200 M-Block

Power Amplifier

Welcome to the Outlaw Family! With your purchase of a Model 200 M-Block Amplifier you have become part of a unique, worldwide community of audio- philes and home theater enthusiasts. With one or more Model 200 amplifiers you have the option to add power and flexibility to your system for a wide range of applications, such as; adding rear surround channels to a new 7.1 system, powering passive subwoofers, enabling bi-amp speaker configurations, power- ing multi-zone/multi-room speakers and much more.

The Model 200 is compact, yet powerful, delivering 200 watts at eight ohms (20Hz–20KHz, >0.05%THD). Thanks to a unique circuit design and a heavy- duty power supply with a horizontally oriented torroidal transformer, the Model 200 operates without a fan despite the deep power reserves.

Since the Model 200 will often be used in multiple unit systems, a variety of power control options are provided. In addition to a standard power on/off switch, the Model 200 may be operated from the external trigger control of compatible products such as the Outlaw Model 950. Both in and out trigger jacks are provided so that the control signal may be cascaded. For systems where an external trigger is not available, the Model 200’s music sense circuitry is available for automatic turn-on whenever an audio signal is present.

In order to fully enjoy the performance of your amplifier, please take a few minutes to read this owner’s manual. It contains important information that will help you to make certain that the amplifier is properly configured for operation with the rest of the equipment in your system.

Once again, welcome to the Outlaw family!

Features

High-power M-Block amplifier

Unique dual-topology circuit design

Music Sense circuitry and low voltage trigger connection for automatic turn-on

Five-way binding posts accommodate large gauge speaker cable

Fan-free convection cooling

Efficient power supply with torroidal transformer

Removable IEC power cord

Unpacking

The carton and packing materials used in shipping your new amplifier were specially designed to cushion it from the shocks and vibration of shipping. We strongly suggest that you save the carton and packing materials to use if you move, or if the unit ever needs to be shipped back to us for any reason.

To minimize the size of the carton in storage, you may wish to flatten it by carefully opening the top and bottom flaps and folding the carton flat. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

Model 200 M-Block Power Amplifier