Pass Labs XP-30 owner manual Second

Page 6

XP-30 Owner’s Manual

Additional channels beyond the normal two may require a different fuse value, please contact the factory for your specific application.

The input frequency rating of the power-supply is presumed 50-

60 Hz in all instances. Some individuals may wish to use a power regeneration apparatus, and slightly higher lines frequency is presumed acceptable. The preamplifier typically draws 45 watts of power from the utility mains during operation as a 2 channel preamplifier. Additional channel demands increase the demand for line wattage by approximately 15 watts per channel.

We have provided a high quality standard IEC AC power cord that fits into the IEC 320 line receptacle at the rear of the power supply

/control chassis. This is the power cord we use for all product evaluation. You may substitute an equivalent “after market” power cord of your choosing; however, we strongly suggest that any cord you select must carry all appropriate government certifications for your location.

Under no circumstances defeat the safety ground provided by the power cord. We have provided internal isolation to help prevent ground loops. If ground loops exist in your system which suggest to you that you might want to disconnect this earth ground, please contact your dealer or the factory first. Be aware that some of the internal noise filters of this product presume a good earth ground through the power cord. Removing that ground may compromise system performance.

Do not plug in the power cord yet.

Second

Place the components that comprise the XP-30 in the locations where you plan to use them. They don’t need a lot of ventilation, but a little is helpful.

On the rear of each control chassis are two identical DIN-25 sockets in parallel with one another. You may connect either socket to the control chassis, as previously indicated they are identical. The second socket provides daisy chain capability for additional gain channels.

The DIN-25 connecting cables only communicate power, and control commands to the gain stages. At no time does audio signal cross the DIN-25 umbilical cables. Keeping each gain channel chassis 100% isolated from every other gain channel chassis reduces channel cross-talk to a near theoretical minimum.

6

Image 6
Contents PassTM Introduction Description Page Set-up Setup and Operation Power ConnectionFirst Second Third Handy Features Page Page For your protection please read the following Pass Labs Warranty Pass

XP-30 specifications

The Pass Labs XP-30 is a flagship preamplifier that epitomizes the craftsmanship and engineering excellence of Pass Labs. Designed for audiophiles who demand the utmost in sound quality and performance, the XP-30 combines innovative technology with a robust, elegant design that complements any high-end audio system.

At its core, the XP-30 features a fully balanced design, employing differential circuitry that minimizes noise and distortion. This design philosophy ensures that audio signals remain pure and untainted from the source to the output, providing an immersive listening experience. The use of discrete components rather than integrated circuits is a hallmark of Pass Labs’ approach, ensuring greater control over the audio signal path.

The XP-30 incorporates a class-A output stage, renowned for its linearity and fidelity. This characteristic allows the preamplifier to deliver exceptional dynamic range, making it capable of handling the most complex musical passages with ease. With a frequency response extending well beyond the audible range, the XP-30 captures every nuance and detail in the music, allowing listeners to experience recordings as they were intended to be heard.

Another standout feature of the XP-30 is its extensive connectivity options. It provides a variety of inputs and outputs, including balanced XLR and unbalanced RCA options, allowing for seamless integration with various audio components. This versatility ensures that the XP-30 can cater to diverse system configurations and preferences.

The user interface of the XP-30 is intuitive and user-friendly. It includes a remote control that allows for easy adjustment of volume levels, input selection, and other key functions. The front panel features a large display that provides real-time information about the current input, volume settings, and other operational details.

Overall, the Pass Labs XP-30 preamplifier is a masterpiece of audio engineering. Its combination of advanced technology, meticulous build quality, and exceptional performance makes it a coveted piece of equipment for those who seek the very best in high-fidelity sound reproduction. Audiences who experience the XP-30 will appreciate its ability to reveal the subtleties and emotions within music, making it a worthy addition to any serious audio system.