Third

XP-30 Owner’s Manual

Connect the power supply / control chassis to the gain stages by the supplied DIN-25 umbilical cables. They must be pressed firmly into the receptacles, keeping in mind that the connector shell is trapezoidal, which keys the proper orientation. Finger tighten the screws on either side of the connector shell. Do not use excessive force, take care not to cross thread the screws.

There are a total of seven inputs on each chassis. The first inputs are numbered 1-5. Input 6 has been named “Pass-Thru” and is intended for use with a home theater processor (see the later notes on use of input 6). Input 7 is the tape loop.

The XP-30 is shipped with shorting plugs on the input XLR connectors which connection the (-) pin 3 input to the ground pin 1 input. Save these jumpers. They are not only gold plated and thus valuable, but you will need them when you wish to operate an input with RCA (single-ended) connections. The XLR pins are numbered, but you’ll have to look close, maybe with a hand lens.

There are two sets of balanced and single ended outputs on each channel, designated “master” and “slave”. You may connect and use as many of these outputs as you wish without degradation of signal. Each output is derived from it’s own circuit element and is totally independent of any other outlet. On the XLR, pin 1 is ground, pin 2 is positive and pin 3 is negative.

The XP-30 also incorporates a “tape-loop” for those users who either record or wish to insert a processor loop as a side chain. Tape out communicates directly back to the input bus, bypassing the volume control. Tape out is always active, with one exception, where Tape Out is isolated from Tape Input to avoid a feedback loop.

The tape loop is only available from the remote control and is selected or deselected by a single keystroke of the “Tape” button on the hand remote. When tape is selected from the hand remote, the display on the power supply shows a lower case “t” on the right hand side of the display. When the letter “t” is showing, the tape input

is “selected” and all other inputs are “deselected”, regardless of any previous settings you may have chosen. Pressing the “Tape” button a second time, cancels the command.

XP-30 specifications

The Pass Labs XP-30 is a flagship preamplifier that epitomizes the craftsmanship and engineering excellence of Pass Labs. Designed for audiophiles who demand the utmost in sound quality and performance, the XP-30 combines innovative technology with a robust, elegant design that complements any high-end audio system.

At its core, the XP-30 features a fully balanced design, employing differential circuitry that minimizes noise and distortion. This design philosophy ensures that audio signals remain pure and untainted from the source to the output, providing an immersive listening experience. The use of discrete components rather than integrated circuits is a hallmark of Pass Labs’ approach, ensuring greater control over the audio signal path.

The XP-30 incorporates a class-A output stage, renowned for its linearity and fidelity. This characteristic allows the preamplifier to deliver exceptional dynamic range, making it capable of handling the most complex musical passages with ease. With a frequency response extending well beyond the audible range, the XP-30 captures every nuance and detail in the music, allowing listeners to experience recordings as they were intended to be heard.

Another standout feature of the XP-30 is its extensive connectivity options. It provides a variety of inputs and outputs, including balanced XLR and unbalanced RCA options, allowing for seamless integration with various audio components. This versatility ensures that the XP-30 can cater to diverse system configurations and preferences.

The user interface of the XP-30 is intuitive and user-friendly. It includes a remote control that allows for easy adjustment of volume levels, input selection, and other key functions. The front panel features a large display that provides real-time information about the current input, volume settings, and other operational details.

Overall, the Pass Labs XP-30 preamplifier is a masterpiece of audio engineering. Its combination of advanced technology, meticulous build quality, and exceptional performance makes it a coveted piece of equipment for those who seek the very best in high-fidelity sound reproduction. Audiences who experience the XP-30 will appreciate its ability to reveal the subtleties and emotions within music, making it a worthy addition to any serious audio system.