GE HO97872 Selecting the Frequency Channel, Inserting the Batteries, Checking the Batteries Power

97872 Instructions.quark 2/26/02 1:25 PM Page 4

Selecting the Frequency Channel

The RF-Mouse operates on two frequency channels. To prevent interference when using two RF Mice in close proximity a different frequency channel should be used for each mouse. Refer to the following to change the fre- quency channel for your mouse:

1.Set the frequency channel on the receiver to 1 or 2.

2.Set the frequency channel on the mouse to 1 or 2. (The frequen- cy channel for mouse and receiver must be the same.)

Inserting the Batteries

The RF-Mouse uses two AAA batteries. For best per- formance, use only alkaline batteries. Refer to the fol- lowing to insert the batteries:

1.Press the up cover and move backward as shown here and remove the cover.

2.Insert the two AAA batteries. (The correct polarity is indicated on the battery compartment casing.)

3.Replace the cover.

Checking the Batteries Power

To check the battery power, right-click the mouse icon in the Taskbar. Choose the "Check RF-Mouse Status" option to display the RF-Mouse Status window. The cur- rent battery percentage charge is shown.

Installing the Mouse Software

Before you can take advantage of the many features your mouse offers, you must install the driver. The driver is on the installation diskette that came packaged with your

mouse.2