ID Setting

This wireless keyboard kits contains 2 channels, and each channel contains 255 sets ID. This extra ID-recognition function helps to protect against interference from other RF keyboards in the same environment.

#The word CONNECT labels the ID button on each unit.

#The LED under ID button of receiver shows connecting condition.

Step 1: Press the ID button on the top of the receiver once.

ID Button

ID Button of Receiver

Step 2: Press the ID button on the bottom of the mouse once.

CHANNEL SWITCH

ID Button of Mouse

ID BUTTON

Step 3: Press the ID button on the bottom of the keyboard once.

ID Button of Keyboard

ID Button CH2

CH1

Remarks:

1.You must follow the procedure above to set the ID of receiver, mouse and keyboard. Once the receiver ID button is pressed you have 35 seconds to complete the entire process, or you will need to begin again.

2.Once the keyboard and receiver are plugged in, the yellow receiver light will flash. Once the ID is set, it will remain steadily lit.