Connect hardware

•Programmable buttons — these two mouse buttons can be set to perform a variety of functions. (The software must be installed to change the actions of the buttons.) The default actions are back and forward.

•Scroll wheel —Move the scroll wheel left or right to scroll horizontally. Roll the wheel to scroll up and down.

•DPI button —your mouse has two sensitivity settings: standard and high- performance. High-performance mode allows the cursor to move very quickly and is useful for activities such as gaming. Press the DPI button to switch modes.

•Low battery indicator —this indicator flashes when the battery needs to be replaced.

Note: Some button functions require installation of the included software.

•Remove the battery compartment cover, install 1 AA battery and replace the battery compartment cover.

•Slide the On/Off switch on the bottom of the mouse to On. The low battery indicator flashes for 10 seconds.

•Connect the USB nano receiver to a USB port on your computer. The drivers for your mouse load automatically.