iHome IH-M132ZD Troubleshooting, My mouse does not work at setup, Mouse has stopped working

•Click OK to accept the changes and exit.

7. Where can I download the latest driver?

Visit www.life-works.com/drivers

8. Where can I find warranty information?

Visit www.life-works.com/warranty

Troubleshooting

1. My mouse does not work at setup

•Ensure the USB nano receiver is connected.

•Connect the USB nano receiver to a different USB port.

•Check that the battery is inserted correctly into the battery compartment.

•Install a fresh battery.

•Move the mouse closer to the USB nano receiver.

•Connect the USB receiver to a different USB port. Try a USB port on the computer, not a USB hub.

2. Mouse has stopped working

•Check that the battery is good. If necessary, replace the battery.

•Ensure the laser sensor on the mouse is clean.

3. Low battery indicator continues to flash