Nortel Networks manual Enabling L2TP on an Existing PPP Interface, Choose Edit Circuit

Page 39

 

 

 

Starting L2TP

 

 

 

 

 

 

 

 

 

 

Site Manager Procedure (continued)

 

 

 

 

 

You do this

 

System responds

 

 

 

 

 

11. Click on OK.

 

 

 

 

 

 

 

12. Click on Done.

 

You return to the Configuration Manager

 

 

 

window.

 

 

 

 

Enabling L2TP on an Existing PPP Interface

To enable L2TP on an interface with PPP and IP already enabled, complete the following tasks:

Site Manager Procedure

You do this

System responds

 

 

 

1.

In the Configuration Manager window,

The Edit Connector window opens.

 

choose a WAN connector.

 

 

 

 

2.

Choose Edit Circuit.

The Circuit Definition window opens.

 

 

 

3.

Choose Protocols in the top left corner of

The Protocols menu opens.

 

the window.

 

 

 

 

4.

Choose Add/Delete.

The Select Protocols window opens.

 

 

 

5.

Choose L2TP, then click on OK.

The L2TP Configuration window opens.

 

 

 

6.

Set the following parameters:

 

 

• RADIUS Primary Server IP Address

 

 

• RADIUS Primary Server Password

 

 

• RADIUS Client IP Address

 

 

Click on Help or see the parameter

 

 

descriptions beginning on page A-5.

 

 

 

 

7.

Click on OK.

The L2TP Tunneling Security window

 

 

opens.

 

 

 

8.

Click on OK.

The L2TP IP Interface List window opens,

 

 

followed by the L2TP IP Configuration

 

 

window.

 

 

 

 

 

(continued)

303532-A Rev 00

2-5

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Configuring L2TP Services Copyright 1998 Bay Networks, Inc Bay Networks, Inc. Software License Agreement Rev Contents Chapter Starting L2TP Appendix B Configuration Examples Page Figures Page Tables Page Before You Begin PrefaceItalic text Text ConventionsAcronyms Bay Networks Technical Publications How to Get HelpTopic Chapter L2TP OverviewL2TP Benefits What Is Tunneling?L2TP Sessions Remote Host Components of an L2TP NetworkL2TP Access Concentrator LAC Remote Access Server RASTunnel Management Server TMS Radius Server L2TP Network Server LNSExamples of L2TP Networks L2TP Network Using a LACPacket Encapsulation Process L2TP Packet EncapsulationMaking a Connection Across an L2TP Network Security in an L2TP Network Bay Networks L2TP Implementation Tunnel Management Tunnel AuthenticationShows tunnel authentication Radius User Authentication L2TP IP Interface Addresses Radius AccountingRemote Router Dialing the LNS Remote Router ConfigurationIf you want to Go to Where to Go NextPage Chapter Starting L2TP Tunnel Authentication Passwords Planning Considerations for an L2TP NetworkRadius Server Information Choose Local File , Remote File , or Preparing a Configuration FileSite Manager Procedure You do this System responds Tools Choose Configuration ManagerSubnet Mask Enabling L2TP on an Unconfigured WAN InterfaceEnabling L2TP on an Existing PPP Interface Choose Edit CircuitChoose Add/Delete Configuring L2TP Services Enabling L2TP on an Existing Frame Relay Interface Configuration is completed Choose Group Protocols Site Manager ProcedureEnabling L2TP on an Existing ATM Interface You do this System respondsChoose Protocols Choose Service AttributesChapter Customizing L2TP Services Choose L2TP Configuration Modifying the L2TP Protocol ConfigurationRadius Server on Modifying Radius Server InformationChanging the LNS System Name Modifying the Number of L2TP Sessions Permitted Set the Remove Domain Name Keeping the Remote User’s Domain NameSet the Domain Name Delimiter Changing the Domain Name DelimiterChoose Tunnel Authentication Enabling Tunnel AuthenticationChoose L2TP IP Interface Modifying L2TP IP Interface AddressesDisabling L2TP Disabling RIPDeleting L2TP from a PPP Interface Customizing L2TP ServicesDeleting L2TP from a Frame Relay Interface Deleting L2TP from an ATM Interface Site Manager Procedure Topic Appendix a L2TP ParametersFigure A-1. L2TP Configuration List Window L2TP Configuration ParametersParameter Enable L2TP Parameter Max L2TP SessionsParameter Receive Window Size Parameter Retransmit Timer seconds Parameter Hello Timer secondsParameter Maximum Retransmit Parameter Ack Timeout milliseconds Parameter LNS System NameParameter Radius Primary Server IP Address Parameter Radius Primary Server Password Parameter Radius Client IP AddressParameter Tunnel Flow Control Parameter Domain Name Delimiter Parameter Remove Domain NameFigure A-2. L2TP Tunnel Security List Window L2TP Tunnel Security ParametersParameter Tunnel Authentication Password Parameter Enable Tunnel AuthenticationFigure A-3. L2TP IP Interface List Window L2TP IP Interface ParametersParameter Subnet Mask Parameter L2TP IP Interface AddressParameter RIP Enable Example 1 Remote PC Calling the Corporate Network Appendix B Configuration ExamplesFigure B-1. L2TP Network with PCs at the Remote Site Configuring the Remote HostsParameter Name Value IP Address 192.32.16.55 Configuring the LACs and the TMSConfiguring the LNS Domain name baynetworks.comL2TP IP Interface window, enter the L2TP IP address Data Path Through the NetworkFigure B-2. L2TP Network with Routers at the Remote Site Example 2 Remote Router Calling the Corporate NetworkConfiguring the Dial-on-Demand Circuit Configuring the PPP InterfaceParameter Name Value RFC1661 Compliance Enable Problem What to Do Appendix C TroubleshootingTable C-1 Common L2TP Network Problems and Solutions L2TP IndexIndex-2

L2TP specifications

Nortel Networks L2TP, or Layer 2 Tunneling Protocol, is a widely recognized networking protocol that enables the tunneling of data over various networks. Initially developed as an extension of the Point-to-Point Tunneling Protocol (PPTP), L2TP integrates components from both PPTP and Layer 2 Forwarding (L2F). Nortel Networks played a significant role in the development and implementation of L2TP, making it a prominent choice for service providers and enterprise networks seeking secure and efficient connectivity.

One of the primary features of L2TP is its ability to encapsulate data packets, allowing the transport of PPP (Point-to-Point Protocol) frames without necessitating the traditional point-to-point connections. This means L2TP can operate across different networks, facilitating remote access connections and VPNs (Virtual Private Networks). As a result, organizations can achieve greater flexibility in managing their communications infrastructure.

Another key characteristic of L2TP is its support for both IPv4 and IPv6, ensuring compatibility with current and future networking environments. L2TP operates at the link layer of the OSI model, which means it functions between the data link and network layers, making it versatile for various applications. By using UDP (User Datagram Protocol) as a transport protocol, L2TP ensures efficient data transmission while maintaining lower latencies.

Security is a critical aspect of L2TP. While L2TP itself does not provide encryption, it is often paired with IPSec (Internet Protocol Security) for enhanced security protocols. This combination offers both tunneling and encryption, creating a secure framework for transmitting sensitive information across potentially insecure networks, such as the Internet.

L2TP also features various authentication methods, allowing for robust access control. It supports various schemes like PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol), giving network administrators a range of options to ensure the legitimacy of users accessing the network.

In summary, Nortel Networks L2TP is a powerful tunneling protocol known for its flexibility, compatibility, and security features. Its ability to encapsulate data for efficient transport makes it ideal for remote access and VPN applications. As organizations continue to demand secure, seamless connectivity, L2TP remains a resilient choice within the shifting landscape of networking technologies.
Top Page Image Contents