Nortel Networks L2TP Configuring the LACs and the TMS, Configuring the LNS, Parameter Name Value

Page 73

Configuration Examples

Configuring the LACs and the TMS

The LACs in this network are Model 5399 Remote Access Concentrators. Both devices have L2TP modules installed. See Model 5399 Remote Access Concentrator documentation for information about configuring L2TP.

The LACs use the same TMS, which you configure with the following information:

Domain name: baynetworks.com

Tunnel end point address (LNS address): 192.32.16.55

Tunnel authentication password: LAC1

Configuring the LNS

The LNS in this network is a BN router with at least two synchronous interfaces. To configure the router as an LNS:

1.Choose a WAN port for the slot you want as the LNS.

2.From the WAN Protocols menu, choose Frame Relay.

3.From the Select Protocols menu, choose IP and L2TP.

4.In the IP Configuration window, enter the IP address of the LNS.

Parameter Name

Value

 

 

IP Address

192.32.16.55

 

 

5.In the L2TP Configuration window, enter the RADIUS server information.

Parameter Name

Value

 

 

RADIUS Primary Server IP Address

192.32.26.6

 

 

RADIUS Primary Server Password

bay_private

 

 

RADIUS Client IP Address

192.32.16.55

 

 

303532-A Rev 00

B-3

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Configuring L2TP Services Copyright 1998 Bay Networks, Inc Bay Networks, Inc. Software License Agreement Rev Contents Chapter Starting L2TP Appendix B Configuration Examples Page Figures Page Tables Page Before You Begin PrefaceItalic text Text ConventionsAcronyms Bay Networks Technical Publications How to Get HelpTopic Chapter L2TP OverviewL2TP Benefits What Is Tunneling?L2TP Sessions Remote Host Components of an L2TP NetworkRemote Access Server RAS L2TP Access Concentrator LACTunnel Management Server TMS Radius Server L2TP Network Server LNSExamples of L2TP Networks L2TP Network Using a LACPacket Encapsulation Process L2TP Packet EncapsulationMaking a Connection Across an L2TP Network Security in an L2TP Network Bay Networks L2TP Implementation Tunnel Management Tunnel AuthenticationShows tunnel authentication Radius User Authentication L2TP IP Interface Addresses Radius AccountingRemote Router Dialing the LNS Remote Router ConfigurationIf you want to Go to Where to Go NextPage Chapter Starting L2TP Planning Considerations for an L2TP Network Tunnel Authentication PasswordsRadius Server Information Site Manager Procedure You do this System responds Preparing a Configuration FileTools Choose Configuration Manager Choose Local File , Remote File , orSubnet Mask Enabling L2TP on an Unconfigured WAN InterfaceChoose Edit Circuit Enabling L2TP on an Existing PPP InterfaceChoose Add/Delete Configuring L2TP Services Enabling L2TP on an Existing Frame Relay Interface Configuration is completed Enabling L2TP on an Existing ATM Interface Site Manager ProcedureYou do this System responds Choose Group ProtocolsChoose Protocols Choose Service AttributesChapter Customizing L2TP Services Choose L2TP Configuration Modifying the L2TP Protocol ConfigurationRadius Server on Modifying Radius Server InformationChanging the LNS System Name Modifying the Number of L2TP Sessions Permitted Set the Remove Domain Name Keeping the Remote User’s Domain NameSet the Domain Name Delimiter Changing the Domain Name DelimiterChoose Tunnel Authentication Enabling Tunnel AuthenticationChoose L2TP IP Interface Modifying L2TP IP Interface AddressesDisabling L2TP Disabling RIPDeleting L2TP from a PPP Interface Customizing L2TP ServicesDeleting L2TP from a Frame Relay Interface Deleting L2TP from an ATM Interface Site Manager Procedure Topic Appendix a L2TP ParametersFigure A-1. L2TP Configuration List Window L2TP Configuration ParametersParameter Max L2TP Sessions Parameter Enable L2TPParameter Receive Window Size Parameter Hello Timer seconds Parameter Retransmit Timer secondsParameter Maximum Retransmit Parameter LNS System Name Parameter Ack Timeout millisecondsParameter Radius Primary Server IP Address Parameter Radius Client IP Address Parameter Radius Primary Server PasswordParameter Tunnel Flow Control Parameter Domain Name Delimiter Parameter Remove Domain NameFigure A-2. L2TP Tunnel Security List Window L2TP Tunnel Security ParametersParameter Tunnel Authentication Password Parameter Enable Tunnel AuthenticationFigure A-3. L2TP IP Interface List Window L2TP IP Interface ParametersParameter Subnet Mask Parameter L2TP IP Interface AddressParameter RIP Enable Example 1 Remote PC Calling the Corporate Network Appendix B Configuration ExamplesFigure B-1. L2TP Network with PCs at the Remote Site Configuring the Remote HostsConfiguring the LNS Configuring the LACs and the TMSDomain name baynetworks.com Parameter Name Value IP Address 192.32.16.55L2TP IP Interface window, enter the L2TP IP address Data Path Through the NetworkFigure B-2. L2TP Network with Routers at the Remote Site Example 2 Remote Router Calling the Corporate NetworkConfiguring the PPP Interface Configuring the Dial-on-Demand CircuitParameter Name Value RFC1661 Compliance Enable Problem What to Do Appendix C TroubleshootingTable C-1 Common L2TP Network Problems and Solutions L2TP IndexIndex-2

L2TP specifications

Nortel Networks L2TP, or Layer 2 Tunneling Protocol, is a widely recognized networking protocol that enables the tunneling of data over various networks. Initially developed as an extension of the Point-to-Point Tunneling Protocol (PPTP), L2TP integrates components from both PPTP and Layer 2 Forwarding (L2F). Nortel Networks played a significant role in the development and implementation of L2TP, making it a prominent choice for service providers and enterprise networks seeking secure and efficient connectivity.

One of the primary features of L2TP is its ability to encapsulate data packets, allowing the transport of PPP (Point-to-Point Protocol) frames without necessitating the traditional point-to-point connections. This means L2TP can operate across different networks, facilitating remote access connections and VPNs (Virtual Private Networks). As a result, organizations can achieve greater flexibility in managing their communications infrastructure.

Another key characteristic of L2TP is its support for both IPv4 and IPv6, ensuring compatibility with current and future networking environments. L2TP operates at the link layer of the OSI model, which means it functions between the data link and network layers, making it versatile for various applications. By using UDP (User Datagram Protocol) as a transport protocol, L2TP ensures efficient data transmission while maintaining lower latencies.

Security is a critical aspect of L2TP. While L2TP itself does not provide encryption, it is often paired with IPSec (Internet Protocol Security) for enhanced security protocols. This combination offers both tunneling and encryption, creating a secure framework for transmitting sensitive information across potentially insecure networks, such as the Internet.

L2TP also features various authentication methods, allowing for robust access control. It supports various schemes like PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol), giving network administrators a range of options to ensure the legitimacy of users accessing the network.

In summary, Nortel Networks L2TP is a powerful tunneling protocol known for its flexibility, compatibility, and security features. Its ability to encapsulate data for efficient transport makes it ideal for remote access and VPN applications. As organizations continue to demand secure, seamless connectivity, L2TP remains a resilient choice within the shifting landscape of networking technologies.
Top Page Image Contents