| Hardware architecture 45 | |
Table 5 |
| |
Intelligent Peripheral Equipment cards (cont’d.) |
| |
|
|
|
|
| Number of |
| Intelligent Peripheral Equipment cards | terminations |
|
|
|
| NT5K71 Extended CO Trunk card | 4 |
| NT5K72 E&M Trunk card | 4 |
| NT5K82 Extended CO Trunk card | 8 |
| NT5K83 E&M Trunk card | 4 |
| NT5K84 Direct Inward Dial Trunk card | 8 |
| NT5K90 Extended CO Trunk card | 8 |
| NT5K93 Extended CO Trunk card | 8 |
| NT5K99 Extended CO Trunk card | 8 |
| NT8D14 Universal Trunk card | 8 |
| NT8D15 E&M Trunk card | 4 |
| NTAG03 Extended CO Trunk card | 8 |
| NTAG04 Extended CO/Direct Inward Dial card | 8 |
| NTAG36 Meridian Integrated Recorded Announcement | 8 |
| card |
|
| NTCK16 Generic Extended Flexible CO card | 8 |
| Special: |
|
| NT5K20 Extended Tone Detector card | 8 |
| NT5K48 Global Extended Tone Detector card | 8 |
| NT5K92 Direct Inward Dial Tester card | 1 |
|
|
|
| Note: Terminal number (TN) density per segment is 16 to 128 TNs, with 64 | |
| to 512 TNs per IPE module. The maximum TN density assumes all slots | |
| are equipped with NT8D02 Digital Line cards with 16 voice and 16 data TNs | |
| provisioned. A typical mix of line and trunk cards yields a nominal density of 64 | |
| TNs per segment, 256 TNs per IPE module. |
|
|
|
|
Intelligent Peripheral Equipment remote location
In a local operating environment, IPE can be housed up to 15.2 m (50 ft) from the Common Equipment. IPE installed in a remote location extends this range, allowing approximately 112.6 km (70 miles) between local and remote facilities.
This extension is achieved by converting multiplexed loop signals to a form compatible with the commonly used
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Large System Overview
30 September 2008