For your protection please read the following

For your protection please read the following:

X1 Owner’s Manual

Water and moisture: Electrical devices should not be used near water ( as per example, near a bathtub, washbasin, kitchen sink, laundry tub, wet basement or swimming pool ). Care should be taken such that objects do not have the opportunity to fall, and that liquid is never spilled onto or into the device enclosure through openings.

Power Sources: An electrical device must be connected to a mains power source in strict accordance with the supplied product owner’s manual. Please verify that the AC mains voltage specified in the product manual matches those requirements indicated on the unit and the AC voltage provided to your location by the power company.

Grounding: Adequate precautions should be taken so that the grounding provisions built into an electrical product are never defeated.

Power Cords: Pass Laboratories provides a power supply cord that meets all legislated requirements for the market in which the product was originally sold. If you choose to substitute an after-market product we urge you to choose one that is fully safety rated by the necessary local authority.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on, abraded, or pinched by items placed on or against them, paying particular attention to cords where they enter plugs or exit from a device. Never under any circumstance insert a cut or damaged power cord into a mains power socket.

Power and Signal: Cables should never be connected / disconnected with equipment powered up. Failure to heed this warning may damage or destroy equipment.

Ventilation: Power-amplifiers run hot, but you should be able to place your hands on them without discomfort. You must allow for this heat in installation, by providing for free air circulation around the product. Electronics should not be subjected to sources of excessive radiant heat. Excessive heat can shorten the life of the product and may cause the electronics to self-protect and shut down.

Servicing: To reduce the risk of fire, electrical shock or other injuries, the user should not attempt to service the device beyond that which is described in the operating instructions. All other servicing must be referred to qualified service personnel.

X1 specifications

Pass Labs X1 is a high-end preamplifier that embodies the very essence of cutting-edge audio engineering, combining advanced technologies with superior craftsmanship to deliver an exceptional sonic experience. Known for its neutral and transparent sound signature, the X1 is designed to serve as the heart of a high-fidelity audio system, providing precise control over volume and input selection while ensuring signal integrity is maintained.

One of the defining features of the Pass Labs X1 is its fully differential architecture. This design not only enhances noise rejection but also minimizes distortion, resulting in a clean and accurate reproduction of music. The X1 employs a direct-coupled topology, allowing for a wider bandwidth and increased dynamic range, essential for capturing the subtleties of any audio performance.

The X1 also integrates a sophisticated power supply, utilizing separate transformer windings for the analog and digital circuits. This isolation reduces cross-contamination between sections, which is crucial for maintaining the integrity of the audio signal. The power supply is supplemented by high-quality capacitors and regulators, ensuring that the preamplifier operates with stable voltage and low noise.

In terms of connectivity, the Pass Labs X1 offers a comprehensive array of inputs and outputs, including balanced XLR and unbalanced RCA connections. This versatility allows it to interface seamlessly with a variety of sources and amplifiers, making the X1 suitable for both audiophile and professional environments. Additionally, the preamp features a remote control for added convenience, allowing users to adjust settings from a distance without compromising sound quality.

Another notable characteristic of the Pass Labs X1 is its rugged build quality. Constructed using high-grade materials and meticulously tested, the unit not only looks elegant but is designed to last, providing years of reliable performance.

Ultimately, the Pass Labs X1 is a testament to the brand's commitment to excellence in audio reproduction. Whether used in a dedicated listening room or as part of a professional setup, the X1 delivers a listening experience that is both immersive and true to the original recording, making it an invaluable component for any serious music enthusiast or audio engineer.