Nortel Networks 2330 quick start

Page 14

SSM will receive the incoming calls from SPS that are destined for PSTN. For such calls SSM will not be able to find a mapped contact in its registration cache and hence routes the call to configured default gateway which is SIP GW.

The following diagram shows the call flow between a branch PSTN interface/device and branch SIP endpoint.

Image 14

Contents Quick Start Configuration Guide Page Contents Navigation Feature BackgroundNew in this release CS 1000 and Secure Router 2330/4134Page Secure Router Feature Description Survivable SIP Pstn Gateway Page Introduction SR 2330/4134 interoperability with CS SR 2330/4134, CS 1000 componentsSSM Operation SIP Gateway Operation Page Page CS 1000 Configuration SLG ConfigurationDeploy SIP Line software application on the Linux server Sipl node configuration SIP Line service must be enabled on a customer level Password length configuration for SIP clients Enable Isdn for trunking Channel/Route/Trunk for Sipl service Figure Sipl 12a Route configuration for Sipl service Sipl phone configuration Figure Sipl 14b Sipl phone configuration SSG Configuration Figure SSG 1 SSG application deploymentFigure SSG 2 SSG node details Specify a NRS server for SIPGw endpoint NRS/SPS Configuration Figure NRS 1 NRS application deploymentNRS server configuration Dialing plan routes for SSG endpoint configuration SSG endpoint registration status Dialing plan routes for SR 2330/4134 endpoint configuration SIP Clients Configuration CS 1000 PatchesSR 2330/4134 Configuration Configure the SIP Media Gateway to listen on port Configure dynamic registration from SR gateway to active SPS Page Configure Dial peer for FXS phones Ntml Examples Example of Normal mode Ntml normalcs1k.ntm