Nortel Networks 2330 quick start SSG Configuration, Figure SSG 1 SSG application deployment

Page 26

26

SSG Configuration

Please refer to CS 1000 document for detailed information on SSG configuration. SIPL needs a SSG server to route an external call to NRS (Network Routing Service). SIPGW and H323GW endpoints will be configured in SSG to register on specific NRS server.

Steps

1) Deploy Signaling Server software application on the Linux server

Figure SSG 1 – SSG application deployment

2) SSG node configuration:

+ Nodes: Servers, Media Cards

Image 26
Contents Quick Start Configuration Guide Page Contents Navigation Feature BackgroundNew in this release CS 1000 and Secure Router 2330/4134Page Secure Router Feature Description Survivable SIP Pstn Gateway Page Introduction SR 2330/4134 interoperability with CS SR 2330/4134, CS 1000 componentsSSM Operation SIP Gateway Operation Page Page CS 1000 Configuration SLG ConfigurationDeploy SIP Line software application on the Linux server Sipl node configuration SIP Line service must be enabled on a customer level Password length configuration for SIP clients Enable Isdn for trunking Channel/Route/Trunk for Sipl service Figure Sipl 12a Route configuration for Sipl service Sipl phone configuration Figure Sipl 14b Sipl phone configuration SSG Configuration Figure SSG 1 SSG application deploymentFigure SSG 2 SSG node details Specify a NRS server for SIPGw endpoint NRS/SPS Configuration Figure NRS 1 NRS application deploymentNRS server configuration Dialing plan routes for SSG endpoint configuration SSG endpoint registration status Dialing plan routes for SR 2330/4134 endpoint configuration SIP Clients Configuration CS 1000 PatchesSR 2330/4134 Configuration Configure the SIP Media Gateway to listen on port Configure dynamic registration from SR gateway to active SPS Page Configure Dial peer for FXS phones Ntml Examples Example of Normal mode Ntml normalcs1k.ntm