For your protection please

For your protection please	Water and moisture: Electrical devices should not be used near
read the following:	water ( as per example, near a bathtub, washbasin, kitchen sink,
	laundry tub, wet basement or swimming pool ). Care should be
	taken such that objects do not have the opportunity to fall, and that
	liquid is never spilled onto or into the device enclosure through
	openings.
	Power Sources: An electrical device must be connected to a mains
	power source in strict accordance with the supplied product owner’s
	manual. Please verify that the AC mains voltage specified in the
	product manual matches those requirements indicated on the unit
	and the AC voltage provided to your location by the power company.
	Grounding: Adequate precautions should be taken so that the
	grounding provisions built into an electrical product are never
	defeated.
	Power Cords: Pass Laboratories provides a power supply cord that
	meets all legislated requirements for the market in which the product
	was originally sold. If you choose to substitute an after-market
	product we urge you to choose one that is fully safety rated by the
	necessary local authority.
	Power Cord Protection: Power supply cords should be routed so
	that they are not likely to be walked on, abraded, or pinched by items
	placed on or against them, paying particular attention to cords where
	they enter plugs or exit from a device. Never under any circumstance
	insert a cut or damaged power cord into a mains power socket.
	Power and Signal: Cables should never be connected /
	disconnected with equipment powered up. Failure to heed this
	warning may damage or destroy equipment.
	Ventilation: Power-amplifiers run hot, but you should be able to
	place your hands on them without discomfort. You must allow for
	this heat in installation, by providing for free air circulation around
	the product. Electronics should not be subjected to sources of
	excessive radiant heat. Excessive heat can shorten the life of the
	product and may cause the electronics to self-protect and shut down.
	Servicing: To reduce the risk of fire, electrical shock or other
	injuries, the user should not attempt to service the device beyond
	that which is described in the operating instructions. All other
	servicing must be referred to qualified service personnel.

XA30.5 Owner’s Manual

Amplifier, 5XA30.5 specifications

Pass Labs has long been synonymous with high-performance audio amplification, and their 5XA30.5 amplifier is a testament to their commitment to quality and engineering excellence. The 5XA30.5 is an exceptional Class A amplifier designed for audiophiles seeking purity in sound reproduction. One of its standout features is its power output; delivering 30 watts per channel into 8 ohms and a doubled output into 4 ohms, it provides ample power for driving a range of loudspeakers with ease.

One of the key technologies employed in the 5XA30.5 is its Class A circuitry. Unlike other amplification classes that switch on and off to produce sound, Class A amplifiers operate continuously, ensuring that the signal remains uncorrupted. This results in a rich, warm sound that faithfully represents the original recording. The design eliminates crossover distortion, a common issue in other classes of amplification, thus enabling the 5XA30.5 to deliver detailed and smooth audio performance, even at lower volumes.

The amplifier's robust construction further enhances its performance. With a fully balanced differential input stage, the 5XA30.5 minimizes noise and distortion, ensuring that the sound remains crisp and clear. The use of custom-designed output transistors offers superior linearity and thermal stability. Additionally, the generous power supply, equipped with a hefty transformer and ample capacitance, allows the amplifier to handle dynamic peaks without strain, preserving the integrity of the audio signal.

Another notable characteristic of the 5XA30.5 is its elegant design. The aesthetics include a minimalist chassis, machined aluminum front panel, and dual meters that provide real-time performance feedback, allowing audiophiles to observe the amplifier’s operation. Furthermore, it features both single-ended and balanced inputs, offering compatibility with a variety of source components.

Importantly, the 5XA30.5 embodies Pass Labs' philosophy of "the art of amplifier design," resulting in a product that not only performs exceptionally well but also maintains a timeless appeal. Whether for critical listening or enjoying music in a relaxed setting, the Pass Labs 5XA30.5 amplifier promises an unparalleled auditory experience, fulfilling the demands of even the most discerning audiophile. In a landscape where many amplifiers prioritize features over fidelity, the 5XA30.5 remains a beacon of true sound reproductions, demonstrating that exceptional quality and craftsmanship can coexist harmoniously.

read the following:

Amplifier, 5XA30.5 specifications