Nortel Networks 8010 manual Attaching a Cable Guide

Page 12

Attaching a Cable Guide

Attach the cable guides to the left side of the chassis so the bundled cables will not obstruct airflow to the right side of the chassis.

9105FA

1.Loosen, but do not remove, the rack-mounting screws needed to install one cable guide.

9106FA

2.Slide the guide onto the loosened screws.

9107FA

3.Tighten the screws to secure the guide to the chassis.

8

Image 12

Contents Installing the Passport 8010 Chassis USA Requirements Only Japan/Nippon Requirements Only Page About this Guide Before You Begin Unpacking Attaching the Rack-Mounting Brackets Installing the Chassis in a Rack Installing the Power Supply Operational Notes for the Power Supply Attaching a Cable Guide Installing a Module Chassis Specifications Environmental SpecificationsSafety Agency Approvals