Pass Labs Complete Specifications for the X5 Stereo Amplifier

Page 7

X5 Specifications

X5 Owner’s Manual

All figures obtained after a 1 hour warmup, with regulated 120 VAC power line. See manual notes about AC power line regulation.

Gain

30 dB

Freq. Response

-0 dB at DC, -3 dB at 100 kHz

Power Output

125 X 5 watts maximum @ 1% THD,

 

1 kHz, 8 ohms

Maximum Output Voltage

plus, minus 50 volts

Maximum Output Current

plus, minus 10 amps

Input Impedance

22 kohm balanced

Damping factor

200 ref 8 ohms nominal

Slew rate

plus, minus 50 V/uS

Output Noise

300 uV unweighted 20-20 kHz

Balanced CMRR

-85 dB @ 1 kHz (input common

 

mode rejection ratio)

DC offset

< 100 mv

Power Consumption

200 watts idle, 600 watts maximum

Temperature

20 degrees C. above ambient typical

Dimensions

19 “ W x 7” H x 20” D

Shipping Weight

74 lbs.

For more information please contact:

Pass Laboratories Inc.

P.O. Box 219,

24449 Foresthill Rd.,

Foresthill, CA 95631

Tel: 530.367.3690

Fax: 530.369.2193

www.passlabs.com

© 2006, Pass Laboratories Inc.

“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”, “Aleph”, and “Zen” and are all registered trademarks of Pass Laboratories, Inc., and all rights thereto are protected by law.

7

Image 7
Contents PassTM Introduction Setup Page Speaker Interface Fun Hardware Facts X5 Specifications Warranty Information For your protection please read the following

X5 specifications

Pass Labs X5 is a distinguished power amplifier that brings together advanced engineering with a commitment to high-fidelity sound reproduction. Designed for audiophiles who desire an extraordinary listening experience, the X5 is a testament to the brand’s dedication to quality and performance.

At the heart of the X5 is its balanced Class A topology, which ensures that the amplifier delivers a rich sound signature with a lush midrange and extended high frequencies. This configuration minimizes crossover distortion, providing a clean and accurate representation of the input signal. The result is a dynamic range that captures the subtleties in music, from the softest whispers to the most powerful crescendos.

The X5 boasts a powerful output stage capable of delivering 300 watts per channel into 8 ohms, making it suitable for driving a wide range of speakers with ease. This power allows the X5 to maintain control over the speakers, ensuring that even during demanding passages, there is no loss of clarity or detail. The amplifier's ability to handle low impedance loads further enhances its versatility, catering to a vast array of speaker types.

One of the standout features of the Pass Labs X5 is its dual-mono architecture. This design isolates the left and right channels, reducing crosstalk and enhancing stereo imaging. By keeping the signal paths dedicated, listeners can enjoy a more defined soundstage where each instrument and vocal can be placed exactly where it was intended in the mix.

The build quality of the X5 is exceptional, with a robust chassis designed to minimize vibrations and interference. The internal components, including high-quality capacitors and resistors, are meticulously selected to optimize performance and longevity. The attention to detail extends to the heat sink design, which ensures efficient thermal management, keeping the amplifier cool during long listening sessions.

Overall, the Pass Labs X5 power amplifier represents the pinnacle of audio engineering, combining innovative technologies with a robust design to deliver unparalleled sound quality. Whether used in a dedicated listening room or as part of a high-end home theater system, the X5 stands as a premier choice for those who seek the ultimate in audiophile performance. With its impressive power, precision, and beauty, the X5 is not just an amplifier; it is an investment in musical enjoyment for years to come.