Nortel Networks 24R9744 manual Requirements, Switch Set Up

Page 10

Alteon OS 21.0 BBI Quick Guide

Requirements

„GbE Switch Module

„Installed Alteon OS switch software

„PC or workstation with network access to the switch

„Frame-capable Web-browser software, such as the following:

†Netscape Navigator 4.7x or higher

†Internet Explorer 6.0x or higher

„JavaScript enabled in your Web browser

Switch Set Up

Before you can access the BBI, minimal configuration is required on the GbE Switch Module.

IP Interfaces

At least one IP interface must be configured on the switch. This is usually done from the com- mand-line interface during first-time switch set up. Each IP interface address provides a point of access for Alteon OS switch management. The default management interface is 128, which allows access to Alteon OS switch management via the management module network only.

For complete information about configuring IP interfaces, see your GbE Switch Module Installation Guide.

Enabling/Disabling BBI Access

By default, BBI access is enabled. If you need to disable or re-enable access, use the following command from the GbE Switch Module command-line interface:

>>Main# /cfg/sys/access/http <disableenable (or just de)>

For more information on the accessing and configuring the switch through the command-line interface, see your GbE Switch Module Installation Guide.

10 „ Chapter 1: Getting Started

24R9744, March 2006

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Alteon OS 21.0TM Alteon OS 21.0 BBI Quick Guide Contents Dashboard Who Should Use This Book PrefaceRelated Documentation Typographic Conventions Typographic ConventionsHow to Get Help „ Preface Features Getting StartedSwitch Set Up RequirementsWeb Browser Set Up Starting the BBILog in to the switch Allow the BBI Dashboard page to load 14 „ Getting Started Browser-Based Interface Basics Toolbar Context ButtonsCommands Navigation Window Forms WindowMessage Window 20 „ Browser-Based Interface Basics Configuring the Switch Configuration Steps22 „ Configuring the Switch Using the BBI to Load Switch Software 24 „ Configuring the Switch Configuring the Switch „ 26 „ Configuring the Switch Viewing Statistics Steps for Displaying StatisticsView the statistics in the forms window. For example Dashboard Steps for Displaying DashboardsView information shown in the forms window. For example
Top Page Image Contents