Commands

Apply	Pending configuration changes do not take effect until the Apply command is
	selected. Once applied, all changes take effect on the switch immediately. If
	you do not save the changes, however, they will be lost the next time the
	switch is rebooted.
Save	Writes applied configuration changes to non-volatile flash memory on the
	switch.
Revert	Remove pending configuration changes between “apply” commands. Use this
	command to restore configuration parameters set since last “apply” command.
Diff	Show any pending configuration changes.
Dump	Dump the current switch configuration to a script file.
DumpBk	Dump the backup configuration to a script file.
DumpAc	Dump the active configuration to a script file.
Show Log	Opens a new Web-browser window for displaying the 64 most recent switch
	log messages. Close the log browser when finished.
Help	Opens a new Web-browser window for displaying the basic online help infor-
	mation. Close the help browser when finished.
Logout	Log off the switch and exit the BBI.

Chapter 2: Browser-Based Interface Basics 17

24R9744, March 2006