Pass Labs 1INT-30A specification

WARNING

INT-30A Owners Manual

Please keep these instructions and heed all warnings. Use product only for intended function.

For your protection please read the following:

Water and moisture: Electrical devices should not be used near water (as per example, near a bathtub, washbasin, kitchen sink, laundry tub, wet basement or swimming pool. ) Care should be taken such that objects do not have the opportunity to fall, and that liquid is never spilled onto or into the device enclosure through openings.

Power Sources: An electrical device must be connected to a mains power source in strict accordance with the supplied product owners manual. Please verify that the AC mains voltage specified in the product manual match those requirements indicated on the unit and the AC voltage provided to your location by the power company. Unplug this apparatus during lightening storms or when unused for long periods of time. To completely disconnect this apparatus from mains power, disconnect the power cord from the AC receptacle. The equipment power switch does not provide adequate protection to be considered a service disconnect.

Grounding: Adequate precautions should be taken so that the grounding provisions built into an electrical product are never defeated.

Power Cords: Pass Labs provides a power supply cord that meets all legislated requirements for the market in which the product was originally sold. If you choose to substitute an after-market product we urge you to choose a polarized cord that is fully safety rated by the necessary local authority. Under no circumstances defeat the safety purpose of any polarized plugs. If the supplied power cord does not fit your power outlet; consult a qualified electrician, never modify the plug.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on, abraded, or pinched by items placed on or against them, paying particular attention to cords where they enter plugs or exit from a device. Never under any circumstance insert a cut or damaged power cord into a mains power socket.

Power and Signal: Cables should never be connected / disconnected with equipment powered up. Failure to heed this warning may cause injury, damage or destroy equipment.

Ventilation: Power-amplifiers run hot, but you should be able to place your hands on them without discomfort. You must allow for this heat in installation, by providing for free air circulation around the product.

Electronics should not be subjected to sources of excessive radiant heat. Excessive heat can shorten the life of the product and may cause the electronics to self protect and shut down. Never block any ventilation openings. Allow at least 6 inches of clearance around these products for proper ventilation.

1INT-30A specifications

Pass Labs is renowned for its high-quality audio equipment, and the Pass Labs 1INT-30A integrated amplifier exemplifies the company's commitment to excellence. This amplifier is designed for audiophiles seeking a blend of superior sound quality, innovative technology, and robust build.

At the heart of the 1INT-30A is its powerful Class A amplifier topology, which is one of the distinguishing features of Pass Labs products. Class A operation is known for its linearity and minimal distortion, providing a warm and natural sound. The 1INT-30A is capable of delivering 30 watts per channel into 8 ohms, which might seem modest compared to high-powered amplifiers, but the purity of the sound is where it shines. This amplifier can also drive speakers with lower impedances effectively, making it versatile for various audio setups.

One of the standout technologies featured in the 1INT-30A is its Fully Balanced Differential Circuitry. This design helps to minimize noise and interference, ensuring that the audio signal remains clear and accurate from input to output. This attention to detail in the circuit design is instrumental in delivering the pristine sound quality that Pass Labs is known for.

In addition, the 1INT-30A incorporates a high-quality volume control that ensures precise adjustments. The volume is not only easy to operate but also designed to maintain sonic integrity across its range, allowing users to enjoy dynamic performances with minimal compromise.

Another important aspect of the 1INT-30A is its exploitation of minimalist aesthetics combined with sturdy craftsmanship. The amplifier is housed in a beautifully crafted chassis with a front panel that is both elegant and user-friendly. The build quality reflects the high standard typical of Pass Labs, with an emphasis on longevity and reliability.

Connectivity options on the 1INT-30A include multiple analog inputs, allowing for integration with various audio sources like CD players and turntables, which makes it highly adaptable for different audio setups. The inclusion of a high-quality headphone output also adds to its versatility, catering to listeners who prefer private listening experiences.

In summary, the Pass Labs 1INT-30A represents a harmonization of innovative technology and superior sound engineering. From its powerful Class A output to its Fully Balanced Differential Circuitry, every aspect of the amplifier contributes to an exceptional listening experience. With elegant design and meticulous craftsmanship, the 1INT-30A is a testament to Pass Labs' dedication to producing high-fidelity audio equipment that satisfies the exacting demands of audiophiles.