You are ready to play music

INT-30A Owners Manual

Choose either XLR or RCA inputs. If you run both at once on a single input from different components, the sound is not likely to be optimal, but it shouldn’t cause damage anywhere.

Now that the source components and loudspeakers are connected into the amplifier; plug the power cord back into the wall, and turn on the rear power switch.

Push the front panel power button to activate the amplifier and turn the volume control down (counter clock-wise). The front panel display should now be illuminated.

The controls on the front of the Pass Labs integrated amplifier should be intuitive. You should however understand that the volume control is always active and over rides the mute control. Meaning that if at some point you activate the mute control you can un-mute the amplifier by either pushing the mute control a second time or by either advancing or retarding the volume control knob.

The hand remote has some additional convenience features that the front panel does not. Balance from the remote raises or lowers the speaker volume levels relative to each other. Display provides a choice of normal luminance, reduced luminance or display off. In the display “off ” mode the display will be normally dark, yet will provide reduced luminance for several seconds any time a control function on either the remote or integrated amplifier front panel are activated.

Please note: The hand remote is common to several Pass Labs products, not all of the functions on this remote are applicable to your integrated amplifier. Input 5, tape loop, pass through and external amp on are not applicable to the INT-30A, integrated amplifier.

The hand remote has two (2) AAA batteries that can be replaced after the back cover from the remote has been removed. These batteries will need to be changed occasionally.

If you are not comfortable removing the rear cover of the remote and changing batteries, have your dealer change them for you. Batteries may explode if exposed to excessive heat, never leave your remote or any battery powered device in direct sunlight or exposed to excessive heat sources.

With any luck, you can now enter that blissful state of musical nirvana, and we won’t expect you back for a while.

It’s always possible that something may go wrong. If so, don’t get excited. We know It’s really aggravating when a product doesn’t work, but it will get fixed, and often it’s something really simple.

1INT-30A specifications

Pass Labs is renowned for its high-quality audio equipment, and the Pass Labs 1INT-30A integrated amplifier exemplifies the company's commitment to excellence. This amplifier is designed for audiophiles seeking a blend of superior sound quality, innovative technology, and robust build.

At the heart of the 1INT-30A is its powerful Class A amplifier topology, which is one of the distinguishing features of Pass Labs products. Class A operation is known for its linearity and minimal distortion, providing a warm and natural sound. The 1INT-30A is capable of delivering 30 watts per channel into 8 ohms, which might seem modest compared to high-powered amplifiers, but the purity of the sound is where it shines. This amplifier can also drive speakers with lower impedances effectively, making it versatile for various audio setups.

One of the standout technologies featured in the 1INT-30A is its Fully Balanced Differential Circuitry. This design helps to minimize noise and interference, ensuring that the audio signal remains clear and accurate from input to output. This attention to detail in the circuit design is instrumental in delivering the pristine sound quality that Pass Labs is known for.

In addition, the 1INT-30A incorporates a high-quality volume control that ensures precise adjustments. The volume is not only easy to operate but also designed to maintain sonic integrity across its range, allowing users to enjoy dynamic performances with minimal compromise.

Another important aspect of the 1INT-30A is its exploitation of minimalist aesthetics combined with sturdy craftsmanship. The amplifier is housed in a beautifully crafted chassis with a front panel that is both elegant and user-friendly. The build quality reflects the high standard typical of Pass Labs, with an emphasis on longevity and reliability.

Connectivity options on the 1INT-30A include multiple analog inputs, allowing for integration with various audio sources like CD players and turntables, which makes it highly adaptable for different audio setups. The inclusion of a high-quality headphone output also adds to its versatility, catering to listeners who prefer private listening experiences.

In summary, the Pass Labs 1INT-30A represents a harmonization of innovative technology and superior sound engineering. From its powerful Class A output to its Fully Balanced Differential Circuitry, every aspect of the amplifier contributes to an exceptional listening experience. With elegant design and meticulous craftsmanship, the 1INT-30A is a testament to Pass Labs' dedication to producing high-fidelity audio equipment that satisfies the exacting demands of audiophiles.