Error indicators and warning
When you load an unplayable disc or fail to perform operations properly, the following messages are displayed on the unit and the TV screen.
Display | Meaning |
|
|
E7 | Malfunction of surround circuit. |
| Place the unit away from noise source and |
| plug the AC power lead into another wall |
| socket. (*) |
|
|
ERROR | The unit considers the DVD mechanism is |
| defective. (*) |
FAN LOCK | The cooling fan on the rear of the unit does |
| not run. Unplug the AC power lead and |
| check if foreign object get caught around the |
| cooling fan. |
|
|
NO DISC | The disc is not loaded. |
|
|
NO SIGNAL | The digital audio input socket is not |
| connected properly. |
| Unspecified signal is received and cannot |
| be recognised. |
|
|
NO SUPPORT | When copyright protected WMA file is |
| played back. |
(*): Set the main unit to the
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player.
Do not write on either side of the disc, particularly the
Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a soft, dry cloth, wiping straight out from the centre, along the radius.
NO | YES |
| Correct |
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
ENGLISH
References
