Sharp HT-DV40H Timer and sleep operation Remote Control only, E-57, Timer playback

HT-DV40H HT-DV50H

ENGLISH

Timer and sleep operation (Remote Control only)

Advanced Features

Timer playback:

The unit turns on and plays the desired source (DVD/CD, USB, TUNER, OPTICAL 1, OPTICAL 2, AUX IN, SCART) at a preset time.

This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.

Once timer: Once timer play works for one time only at a preset time.

Daily timer: Daily timer play works at the same preset time every day.

For example, set the timer as a wake-up call every morning.

Using the once timer and daily timer in combination:

For example, use the once timer to listen to a radio programme, and use the daily timer to wake up.

1Set the daily timer (pages 57 - 59).

2Set the once timer (pages 57 - 59).

	1 minute or more
	Daily timer		Once timer
Start	Stop	Start	Stop

Note:

When set times for the daily timer and once timer overlap, the once timer takes priority. Allow an interval of at least 1 minute between

operations.

1 2 3

4 5 6

7 8 9

0 +10

Timer playback

Before setting timer:

1Check that the clock is set to the correct time (refer to page 29). If it is not set, you cannot use the timer function.

2For timer playback: Load discs to be played.

1Press the ON/STAND-BY button to turn the power on.

2Press the CLOCK/TIMER button.

3Within 10 seconds, press the or button to select “ONCE” or “DAILY”, and press the MEMORY/DIMMER button.

Set the clock to the correct time if “ONCE” or “DAILY” does not appear.

E-57