Sharp HT-DV40H E-15, Installing the speakers, System connections continued, Preparation for Use

HT-DV40H HT-DV50H

System connections (continued)

ENGLISH

Preparation for Use

E-15

1Horizontal position : Fix the pattern paper and fix two screws into the wall with a distance of 160 mm (6-5/16") in between.

Vertical position	: Fix the pattern paper and screws into
	the wall.
(Horizontal position)	(Vertical position)

Pattern paper for speaker

Pattern paper for speaker

2Make a hole in the wall using a drill.

32 mm (1-1/4")

8 - 9 mm (3/8")

3Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface.

4Fix screws into the wall for the speaker, as shown in the illustration.

Make sure that the screw and the wall can support a load of 20 kg (45 lbs).

Fix the screws, so the screw head extends about 5.5 mm (7/32") from the wall.

5.5 mm (7/32")

Wall surface	Wall mounting	Wall surface
	screw

Installing the speakers

1Align the deco back cover to the hole on the speaker. Fix them securely with the flush screw.

Speaker box

Deco back

cover Flush screw

2 Tighten the screws and remove the paper. Hook the speaker on the screw heads and make sure it is properly secured.

(Horizontal position) (Vertical position)

Speaker		Speaker
wire	Wall surface
Wall surface		wire