Sharp operation manual HT-DV40H Changing the set up menu, E-21, Preparation

HT-DV40HChanging the set up menu

HT-DV50H

ENGLISH
		1	Turn on the TV.
		2	Set the TV to the correct input, eg. “AV1”, “VIDEO”, etc.
		3	Turn on the unit by pressing the
			ON/STAND-BY button.
1	2	3	The SHARP startup screen appears.
4	5	6	Note:
7	8	9	Startup screen will be displayed when
			both S-Video cable and SCART cable
0	+10		are connected to the TV. If only the S-
			Video cable is connected, the screen
Use			may be blank. To set up S-Video mode,
			use video out cable or SCART cable.
		4 Press the SHIFT and SET UP buttons.
for
Preparation		5	press the ENTER button.
			Press the	or		button to select a menu.
			See the list on pages 22 - 27 for set up menu.
		6 Press the		,	,	or button to change the setting and
		7 After setting			is	completed, select
			“EXIT SET UP”, then press the ENTER
			button to return to the main page.

Notes:

The setting are stored even if the unit is set to stand-by mode. The backup function protects the stored setting for a few hours should there be a power failure or AC power lead disconnection. System set up can be performed during playback mode.

E-21