10Introduction
Note on legacy products and releases
This technical document contains information about systems, components, and features that are compatible with Nortel Communication Server 1000 Release 5.5 software. For more information on legacy products and releases, click the Technical Documentation link under Support & Training on the Nortel home page:http://www.nortel.com/.
Applicable systems
This document applies to the following systems:
•Communication Server 1000E (CP PII, CP PIV and CP PM)
•Communication Server 1000M Single Group (CS1000M SG) CP PII CP PIV
•Communication Server 1000M Multi Group (CS1000M MG) CP PII CP PIV
•Meridian 1 PBX 11C Chassis
•Meridian 1 PBX 11C Cabinet
•Meridian 1 PBX 61C CP PII, CP PIV
•Meridian 1 PBX 81C CP PII, CP PIV
Note: When upgrading software, memory upgrades may be required on the Signaling Server, the Call Server, or both.
System migration
When particular Meridian 1 systems are upgraded to run CS 1000 and configured to include a Signaling Server, they become CS 1000M systems.Table 1 "Meridian 1 systems to CS 1000M systems" (page 10) lists each Meridian 1 system that supports an upgrade path to a CS 1000M system.
Table 1
Meridian 1 systems to CS 1000M systems
This Meridian 1 system | Maps to this CS 1000M system | |
|
|
|
Meridian 1 PBX 11C | Chassis | CS 1000E |
|
|
|
Meridian 1 PBX 11C | Cabinet | CS 1000E |
|
|
|
Meridian 1 PBX 61C |
| CS 1000M Single Group |
|
|
|
Meridian 1 PBX 81C |
| CS 1000M Multi Group |
|
|
|
Intended audience
This document is intended for individuals responsible for administering CS 1000 and Meridian 1 systems.
Nortel Communication Server 1000
Library Reference
Release 5.5 20 December 2007
Copyright © 2007, Nortel Networks