Mounting Locations, Engine Compartment | Rockford Fosgate X150.1

INSTALLATION

This section focuses on some of the vehicle considerations for installing your new Amplifier. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each compo- nent will be easily accessible for making adjustments.

!CAUTION: If you feel unsure about installing this system yourself, have it installed by a qualified technician.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Source Unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

The mounting position of your amplified subwoofer will have a great effect on the sound performance produced.

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Trunk Mounting

Mounting the amplifier vertically will provide the best cooling of the amplifier.

Mounting the amplifier on the floor of the trunk will work but provides less cooling capability than vertical mounting.

Mounting the amplifier upside down to the rear deck of the trunk will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the amplifier's heatsink in the passenger compartment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

X150.1 specifications

The Rockford Fosgate X150.1 is an exemplary monoblock amplifier designed for car audio enthusiasts who demand power and performance without compromise. This amplifier stands out with its robust construction and advanced technologies, making it a popular choice for those looking to enhance their in-vehicle sound system.

One of the main features of the X150.1 is its power output. With a maximum power rating of 150 watts RMS at 4 ohms and 300 watts RMS at 2 ohms, this amplifier provides ample power to drive subwoofers effectively. This makes it suitable for users looking to achieve deep, rich bass that enhances their overall sound experience. Additionally, the X150.1 incorporates a high-level input feature that allows for easier integration with factory head units without the need for a line-out converter.

The design of the Rockford Fosgate X150.1 includes a sleek, compact chassis that allows for flexible installation options. It is designed to fit in tight spaces while still providing outstanding performance. The amplifier also features a built-in variable low-pass filter, which enables users to tailor the sound to their preferences by controlling the frequency range that is sent to the subwoofers. This helps to achieve precise sound reproduction, ensuring that bass notes are deep and powerful without muddiness.

Another notable characteristic of the X150.1 is its thermal protection circuit, which safeguards the amplifier from overheating during extended use. This feature is crucial for maintaining reliability and performance, especially when the amplifier is pushed to its limits. Additionally, the amplifier is equipped with a short circuit protection system, further enhancing durability and longevity.

The Rockford Fosgate reputation for high-quality audio components is well reflected in the X150.1. The amplifier includes high-performance MOSFETs that deliver increased efficiency and ensure a clean, distortion-free signal. This attention to detail highlights Rockford Fosgate's commitment to delivering products that not only sound great but also stand the test of time.

In summary, the Rockford Fosgate X150.1 is a powerful and versatile monoblock amplifier that is perfect for audiophiles seeking to elevate their vehicle’s audio system. Its extensive features, including adjustable filters, thermal and short circuit protection, and a compact design, combine to create a performance-focused product that meets the demands of discerning users. Whether you're a casual listener or a dedicated audio enthusiast, the X150.1 is sure to impress with its ability to deliver outstanding sound quality.