HARDWARE INSTALLATION
CONNECTING THE RECEIVER TO YOUR COMPUTER
The connectors of the RF (Radio Frequency) receiver meet the PC 99 Spec. If you have a computer with PC 99 specification, simply plug the purple connector marked with to the same color PS/2 port, or connect the supplied USB to PS/2 adapter to the USB connector and connect it to the mouse’s USB port. Refer to your computer’s manual for the location of PS/2 ports. ! Ô
If your computer is AT type (IBM compatible), please contact your local RadioShack for the optional adapter.
PS/2
USB
INSTALLING BATTERIES
The wireless keyboard and mouse require two AA batteries each (not supplied) for power. We recommend RadioShack alkaline batteries.
! IMPORTANT !
Keep your previous mouse installed as a
Ô NOTE Ô
Before installing or removing the keyboard or mouse (either the original or the new one) to or from your computer, always turn off your computer first. Installing or removing the keyboard or mouse while the computer is running can cause permanent damage to them or your computer.
7