Battery and Charging, Wiring the System

BATTERY AND CHARGING

Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Rockford amplifier without problems, although battery and alternator life can be reduced slightly. To maximize the performance of your Rockford Fosgate amplifier, we suggest the use of a heavy duty battery and an energy storage capacitor.

WIRING THE SYSTEM

CAUTION: Avoid running power wires near the low level input cables, antenna, power leads, sensitive equipment or harnesses. The power wires carry substantial current and could induce noise into the audio system.

1.Plan the wire routing. Take care when running signal level RCA cables to keep them close together but isolated from the amplifier's power cables and any high power auto accessories, especially electric motors. This is done to prevent coupling the noise from radiated electrical fields into the audio signal. When feeding the wires through the firewall or any metal barrier, protect them with plastic or rubber grommets to prevent short circuits. Leave the wires long at this point to adjust for a precise fit at a later time.

2. Prepare the Power cable for attach-	STRIP WIRE
ment to the amplifier by stripping
5/8" of insulation from the end of
5/8" of insulation from the end of		<
the wire. The use of 8 gauge power
the wire. The use of 8 gauge power
cable can interfere with the installa-	AMP
cable can interfere with the installa-	>
tion of the end caps. Proper wire
dress can prevent this from occur-
ring. To prevent the wire from fray-
ing, strip the insulation at a 45°

angle. Insert the bared wire into the B+ terminal the insulation on the top. Bend the cable down at the set screw to secure the cable in place.

INSULATION

5/8"

with the long side of a 90° angle. Tighten

3.Strip 3/8" from the battery end of the power cable and crimp a large ring terminal to the cable. Use the ring terminal to connect to the battery positive terminal. Do not install the fuse at this time.

– 9 –

1000, 360, 400 specifications

Rockford Fosgate is a renowned name in the audio industry, especially recognized for their high-performance car audio systems. Among their range of products, the Rockford Fosgate Punch series, including models like the R1000-1D, R360-4, and R400-4, stands out due to their outstanding features and cutting-edge technology.

The R1000-1D is a monoblock amplifier that delivers a staggering 1000 watts of RMS power at 1 ohm. This powerhouse is particularly suited for subwoofers, maximizing bass output with minimal distortion. Its Class D topology enhances efficiency, ensuring that users get more power with less heat generation, which is a common challenge in high-performance audio systems. Integrated into the design are adjustable low-pass filters and bass boost controls, allowing users to tailor the sound to their liking. Additionally, it features an LED indicator that provides real-time feedback on the amplifier's status, making monitoring easy for users.

Next up, the R360-4 is a versatile four-channel amplifier that can deliver 360 watts of RMS power. This model is ideal for powering multiple speakers or a combination of speakers and subwoofers. With its high and low-level inputs, it is compatible with a variety of audio sources, making it a flexible choice for car audio enthusiasts. Notably, the built-in crossover system provides precise sound processing, ensuring that every component of the audio spectrum is handled efficiently. This amplifier also utilizes Rockford Fosgate's proprietary technology to reduce noise and interference, creating a cleaner sound experience.

Lastly, the R400-4 brings another level of performance to the table with its 400 watts of RMS power output, designed for full-range applications. This amplifier features a compact design, allowing for easy installation in tight spaces. Like the R360-4, it also features high and low-level inputs along with built-in variable crossovers. The thermal and speaker short protection circuitry ensures safety and longevity, providing peace of mind for users.

All three models exemplify Rockford Fosgate's commitment to excellence, making them a popular choice among car audio enthusiasts who prioritize power, versatility, and sound clarity. Whether you are seeking a powerful bass experience or a balanced audio system, the R1000-1D, R360-4, and R400-4 are designed to elevate any car audio setup to new heights.