Rockford Fosgate 400, 360, 1000 manual

4.Prepare a length of cable to be used for the ground connection. Strip 5/8" of insulation from the end of the cable as described above and connect to the appropriate terminal of the amplifier. Prepare the chassis ground by scraping any paint from the metal surface and thoroughly clean the area of all dirt and grease. Strip the other end of the wire and attach a ring connector. Fasten the cable to the chassis using a non- anodized screw and a star washer.

5.Prepare the REM turn-on wire for connection to the amplifier by stripping 1/4" of insulation from the wire end and crimping an insulated spade connector in place. Slide the connector over the REM terminal on the amplifier. Connect the other end of the REM wire to a switched 12 volt positive source. The switched signal is usually taken from the source unit's auto antenna or the accessory lead. If the source unit does not have these outputs available, the recommended solution is to wire a mechanical switch in line with a 12 volt source to activate the amplifier.

6.Securely mount the amplifier (with supplied screws) to the vehicle or amp rack. Be careful not to mount the amplifier on cardboard or plastic panels. Doing so may enable the screws to pull out from the panel due to road vibrations or sudden vehicle stops.

7.Determine the number of inputs needed to drive the amplifier and move the input switch to the desired setting (Power 400 & Power 800 4- channel amplifiers only.).

8.Connect the source signal to the amplifier by plugging the RCA cables into the input jack(s) at the amplifier.

9.Connect the speakers. Strip the speaker wires 5/8" and insert into the appropriate terminal on the amplifier. Insert the bared wire into the speaker terminal and tighten the set screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result.

10.Perform a final check of the completed system wiring to ensure that all connections are accurate. Check all power and ground connections for frayed wires and loose connections which could cause problems from road vibrations.

– 10 –

1000, 360, 400 specifications

Rockford Fosgate is a renowned name in the audio industry, especially recognized for their high-performance car audio systems. Among their range of products, the Rockford Fosgate Punch series, including models like the R1000-1D, R360-4, and R400-4, stands out due to their outstanding features and cutting-edge technology.

The R1000-1D is a monoblock amplifier that delivers a staggering 1000 watts of RMS power at 1 ohm. This powerhouse is particularly suited for subwoofers, maximizing bass output with minimal distortion. Its Class D topology enhances efficiency, ensuring that users get more power with less heat generation, which is a common challenge in high-performance audio systems. Integrated into the design are adjustable low-pass filters and bass boost controls, allowing users to tailor the sound to their liking. Additionally, it features an LED indicator that provides real-time feedback on the amplifier's status, making monitoring easy for users.

Next up, the R360-4 is a versatile four-channel amplifier that can deliver 360 watts of RMS power. This model is ideal for powering multiple speakers or a combination of speakers and subwoofers. With its high and low-level inputs, it is compatible with a variety of audio sources, making it a flexible choice for car audio enthusiasts. Notably, the built-in crossover system provides precise sound processing, ensuring that every component of the audio spectrum is handled efficiently. This amplifier also utilizes Rockford Fosgate's proprietary technology to reduce noise and interference, creating a cleaner sound experience.

Lastly, the R400-4 brings another level of performance to the table with its 400 watts of RMS power output, designed for full-range applications. This amplifier features a compact design, allowing for easy installation in tight spaces. Like the R360-4, it also features high and low-level inputs along with built-in variable crossovers. The thermal and speaker short protection circuitry ensures safety and longevity, providing peace of mind for users.

All three models exemplify Rockford Fosgate's commitment to excellence, making them a popular choice among car audio enthusiasts who prioritize power, versatility, and sound clarity. Whether you are seeking a powerful bass experience or a balanced audio system, the R1000-1D, R360-4, and R400-4 are designed to elevate any car audio setup to new heights.