QUICK INSTALLATION GUIDE FOR USB CONNECTION
1.Be sure that your computer is turned on. If you are running Windows 98, Me, or 2000, you will need to keep your old keyboard and mouse connected for installation.
2.Connect only the receiver to your computer through the USB port. Do not connect the purple PS/2 connection. It is not needed in a USB environment.
Note: When connecting the USB cable to your computer, Windows will start a New Hardware Wizard. In Windows XP, it will complete the Wizard automatically. In Windows 98, Me, and possibly 2000, you will need to follow through the New Hardware Wizard with your old keyboard and mouse.
3.Install the batteries into your Keyboard and Mouse. Please make sure you follow the indication on the inside compartment for correct positioning of the batteries.
4.Power on your computer.
5.The receiver will automatically scan and synchronize the Keyboard and Mouse. They should now be functioning.
6.If automatic synchronization does not occur, please refer to the “Troubleshooting” section of this User Manual.
4