Getting Set Up
Connect the interface cables
Included here is an overview of the printer ports. If you are connecting the printer directly to your computer, refer to “Connecting to the parallel port” on page 18. If you are connecting the printer to a network, refer to the PhaserShare Networking Setup Guide.
Printer port overview
N O T E
Plus, Duplex, and Extended Configurations include a SCSI port; Standard
Configurations require the Z740FP Kit for SCSI support.
The printer is shipped with two interface ports on the printer’s rear panel. Optionally, it supports a SCSI port and one of three optional PhaserShare® network cards. All ports and network protocols are simultaneously active.
1. | Ethernet | standard | |
| Refer to the PhaserShare Networking Setup Guide. | ||
2. | Parallel | standard | Standard |
| Refer to “Connecting to the parallel port” on page 18. | ||
3. | SCSI | optional | For optional peripheral devices |
| Refer to “Connecting a SCSI peripheral device” on page 19 and | ||
| “Connecting peripheral devices” on the printer’s | ||
4. | PhaserShare Card | optional | |
Refer to the PhaserShare Networking Setup Guide.
1
Ethernet
2
Parallel
|
|
|
|
|
| 4 |
|
|
|
| ||
|
| Ethernet Card | Series B | PhaserShareTM |
|
| Series B Token Ring Card | PhaserShareTM | Series B LocalTalk Card | PhaserShareTM | ||
| RX | TX |
|
|
| |||||||
LINK | TP |
| Mbs | 100 | STP |
|
|
| RX | TX |
| |
|
|
|
|
|
|
|
|
|
|
|
| |
10Base2 |
|
|
|
|
| UTP | INS | Mbs | 16 | LocalTalk® |
| |
|
|
|
|
|
|
| RX | TX |
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
SCSI |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Setup Guide | 17 |