RARP and BOOTP B
Here is a sample bootptab Þle; check your host system documentation to see which Þelds your implementation of BOOTP supports.
#Global entries for all hosts
global: :sm=255.255.255.0:\
:bf=dummyfile:
#Master entries for each subnet template subnet60: :tc=global:gw=128.07.60.100: subnet61: :tc=global:gw=128.07.61.150:
#Individual printer entries
The printer recognizes the BOOTP Þelds listed in the following table:
BOOTP Þelds
Field | Description | Values |
|
|
|
gw | Gateway address list | List of IP addresses separated by |
|
| spaces. |
|
|
|
ha | Host hardware address | Hexadecimal; the ha tag must be |
|
| preceded by ht tag. |
|
|
|
ht | Host hardware type (see | Unsigned decimal, octal, or hexadecimal |
| Assigned Numbers RFC) | integer or one of the following symbolic |
|
| names: |
|
| ethernet or ether for 10 Mbit Ethernet; |
|
| ether3 for 3 Mbit experimental Ethernet; |
|
| ieee802 for IEEE 802 |
|
|
|
ip | Host IP address | A single IP address. |
|
|
|
sm | Host subnet mask | A single IP address. |
|
|
|
User Manual |