Tektronix 200 Series user manual NetWare quickstart procedure Quick ConÞguration, TEKxxxxxx

Page 44

4Novell NetWare Configuration

NetWare quickstart procedure (Quick ConÞguration)

Before beginning this procedure, make sure that the printer is connected to the network and turned on.

1.Log on with supervisor privileges.

2.Start the Advanced ConÞguration Tool:

a.Change (CD) to the directory that contains the tool. For example, if the tool is in F:\PUBLIC, type:

CD F:\PUBLIC

b.Type:

ACT

3.Select Quick conÞguration from the ConÞgure menu.

4.The available Tektronix printers are displayed. Select the Tektronix printer you wish to conÞgure and press Enter. The factory default print server name is in the following syntax:

TEKxxxxxx

where xxxxxx are the last six hex digits of the printerÕs Ethernet Address.

Note If the printer does not show up in the list of available printers, you could have a network hardware problem or an incorrect frame type (see ÒPrinter does not appear in the Advanced ConÞguration ToolÓ on page 4-25).

5.When you have selected the Tektronix printer, a list of Þle servers is displayed. Select the Þle server you wish to conÞgure and press Enter.

6.You may be prompted to log in to the server. Log on with supervisor privileges.

4-10Network Utilities for Color Printers

Image 44
Contents Network Utilities for Phaserª Color Printers Page Contents EtherTalk Configuration Macintosh Novell NetWare ConfigurationTCP/IP Configuration Unix Host Configuration for TCP/IP Rarp and Bootp Index SnmpHow to use this manual IntroductionRelated documentation IntroductionPrinter service and repair Whom to call for helpCustomer support Automated information by faxMenus and command names in menus Typographical conventionsFile names, directory names, folder names Sample lines from Ascii ÞlesTar xvf /dev/devicename dir Þle Command line syntaxArp -aprinter-name printer-Ethernet-address Introduction Network Printing with Tektronix Color Printers Startup ConÞgurationHow to tell which protocols are enabled in your printer Network Printing with Tektronix Color PrintersYour printerÕs conÞguration TCP/IP authorization code Network installation overview If you are connecting both EtherTalk and LocalTalk Ethernet connectionEthernet adapters Ethernet connectionsNetwork Printing with Tektronix Color Printers 10Base2 BNC terminators and connectors Ethernet cables and termination10BASE-T Twisted Pair 10BASE2 Thin EthernetYour printerÕs network utilities diskettes Task Macintosh Þle PC Þle Unix Þle 10Network Utilities for Phaser Color PrintersTektronix printer network software Resetting your printer Resetting your printer using PostScript Þles 12Network Utilities for Phaser Color PrintersMacintosh users Choose Download PostScript File from the Utilities menuWorkstation users Lpr -Pqueue-namereset.psPC users Page Using AppleTalk Phase Before you beginPrint out the conÞguration EtherTalk Configuration MacintoshEtherTalk conÞguration overview Finding your printerÕs name in the Chooser Changing your printerÕs zone Changing your printerÕs name optional Printer name and AppleTalk zones PostScript Þles for enabling and disabling protocols Protocol To disable protocols To enable protocolsDisabling protocols EtherTalk Configuration Macintosh Novell NetWare Configuration Novell NetWare Configuration NetWare conÞguration overviewAllowing unencrypted passwords Printer conÞguration using the Advanced ConÞguration Tool Installing the Advanced ConÞguration Tool TKxxxxxxChoosing items in the Advanced ConÞguration Tool Choosing menu itemsList boxes Advanced ConÞguration Tool menu map Novell NetWare Configuration NetWare quickstart procedure Quick ConÞguration Select Quick conÞguration from the ConÞgure menuTEKxxxxxx 10Network Utilities for Color PrintersSelect Save conÞguration and press Enter Select Save conÞguration and restart print serverDefault parameters set up by quick configuration Advanced ConÞguration Tool default print server parametersParameter Default value 12Network Utilities for Color PrintersAdvanced ConÞguration Tool default queue parameters 14Network Utilities for Color Printers Advanced conÞgurationSelect Advanced conÞguration from the ConÞgure menu Submenu Description Choices Configure print server printer menuAdvanced ConÞguration conÞgure print server printer menu Configure print server file server menu 16Network Utilities for Color PrintersConfigure queue menu Advanced ConÞguration ConÞgure queue menuObtaining print server and queue status Print server status menuQueue status menu Current job ConÞgured queues Printer statusChanging the print server name or password Monitoring print server activityIf you configured NetWare using Pconsole Exiting the Advanced ConÞguration ToolPconsole to make the change on that server 20Network Utilities for Color PrintersPress Escape to return to the Available Options Menu Printer conÞguration using PconsoleAdding a print server 22Network Utilities for Color Printers Selecting queues for the printerSelect Queue Servers from the Print Queue Information menu Modifying other print server parameters optional Full Name Print Server OperatorsPostScript Þles for disabling and enabling protocols How to disable protocols24Network Utilities for Color Printers Troubleshooting Printer does not appear in the Advanced ConÞguration ToolTesting the Þle server-to-printer connection 26Network Utilities for Color PrintersCannot submit job to a queue Select ConÞgure queue from the Advanced conÞguration menuJob appears in queue, but printer does not to service it 28Network Utilities for Color PrintersJob is serviced, but does not print Page TCP/IP Configuration Information Comments TCP/IP ConfigurationRequired information for TCP/IP conÞguration Tar tvf /dev/devicename Tar tvf /dev/fd0Send index from library-name Colorprinterinfo@TEKTRONIX.TEK.COMSend index Send utilities from tcpip Send filename from library-nameSend list of filename from library-name Print configuration Configure hostConfigure printer TCP/IP conÞguration overviewAuthorizing the TCP/IP protocol How to tell if TCP/IP is authorized on your printerPrinting out the conÞguration Sending the authorization code to your printer Authorizing TCP/IP from a Macintosh 10Network Utilities for Phaser Color Printers Authorizing TCP/IP from a PC ADDCTRLD.BATCD C\PHASER Addctrld C\PHASER\AUTHRIZE.PS Run the script authorize-feature Authorizing TCP/IP from a Unix hostAddctrld filename1.ps filename2.ps 16Network Utilities for Phaser Color Printers ConÞguring your hostConÞguring your printer Setting your printerÕs IP address 18Network Utilities for Phaser Color PrintersTCP/IP Configuration 20Network Utilities for Phaser Color Printers IP parameters Parameter Description22Network Utilities for Phaser Color Printers ConÞg-IP filenamePrinter-name Ethernet-address Ether printer-name Ethernet-address for SystemLPR BSD systems Controlling host access and control character Þltering24Network Utilities for Phaser Color Printers Lpr -Pqueue-name filename AppSocket TCP Sockets Receiving printer status optional SyslogSyslog priorities Priority Number DescriptionTCP/IP Configuration Snmp 30Network Utilities for Phaser Color Printers Ping printer-IP-address Testing the network connectionPing printer-name Solving printing problems 32Network Utilities for Phaser Color PrintersEthertalk/ethertalk-off.ps Ethertalk/ethertalk-on.ps Page Requesting information from the Tektronix Information Server Requesting information from HALUnix Host Configuration for TCP/IP 2Network Utilities for Phaser Color PrintersHAL articles for TCP/IP host conÞguration Number TitleEnabling Rarp Grep rarpd /etc/rc.localRarp and Bootp For BSD systemsKill -HUP Arp -s ether P480-mktg 080011010045 arp -s ether P480-salesUsr/etc/rarpd -a Rarp and Bootp BFor System Ls bootp 4Network Utilities for Phaser Color PrintersBootp Þelds Field Description ValuesRunning Bootp Bootp always runningGrep bootpd /etc/rc.local Grep bootp /etc/servicesGrep bootpd /etc/inetd.conf Bootp running only on requestEtc/bootpd -s 8Network Utilities for Phaser Color Printers Index Index-1Index-2Network Utilities for Phaser Color Printers FILTER.PSTCP/IP Index-3Index-4Network Utilities for Phaser Color Printers

200 Series specifications

The Tektronix 200 Series, renowned for its precision and versatility, represents a significant advancement in the world of oscilloscopes. This series is designed to meet the diverse needs of engineers, educators, and technicians, providing an impressive array of features tailored to various applications.

One of the main features of the Tektronix 200 Series is its high bandwidth capabilities. With models offering bandwidths ranging from 50 MHz to 200 MHz, these oscilloscopes can capture fast transient signals with exceptional clarity. This makes them ideal for testing and analyzing modern electronics, including embedded systems and high-speed digital circuits.

The user-friendly interface of the 200 Series is another significant attraction. Equipped with a large, bright display, users can easily view waveforms and measurements. The intuitive controls facilitate quick setup and adjustments, allowing users to focus on their work rather than spending time deciphering complex menus. Additionally, the presence of a context-sensitive help feature guides users through the oscilloscope's functionalities.

Tektronix has integrated advanced triggering capabilities into the 200 Series, ensuring accurate signal capture. With features like Edge, Pulse, and Video triggers, users can isolate specific events within a signal for detailed analysis. This level of sophistication is invaluable in troubleshooting and debugging electronic designs.

Another remarkable characteristic is the series' ability to perform mathematical functions. Users can combine waveforms, measure differences, or compute parameters directly on the display. This functionality enhances the analysis capabilities, making it easier to interpret complex signals.

The Tektronix 200 Series also includes a range of connectivity options. USB ports for data transfer and storage facilitate seamless integration into modern workflows, allowing users to save measurements or share data conveniently. The optional Ethernet interface enhances remote access, enabling engineers to monitor and control the oscilloscope from anywhere.

In terms of technology, the 200 Series employs a proprietary digital phosphor technology, which provides real-time display of signal variations. This innovative approach enhances the user experience by delivering a rich, detailed waveform presentation that is crucial for accurate analysis.

In summary, the Tektronix 200 Series oscilloscopes combine high bandwidth, user-friendly design, advanced triggering, mathematical capabilities, and robust connectivity. These characteristics make the 200 Series an invaluable tool for engineers and technicians who require reliable performance and precision in their work. The series stands as a testament to Tektronix's commitment to innovation and quality in the test and measurement industry.