Panasonic AW-IF400G manual English Version, FCC Note

Page 2

ENGLISH VERSION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance.

For CANADA

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

FCC Note:

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to external units. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to operate it.

- 1 (E) -

 

indicates safety information.

Image 2
Contents AW-IF400G English Version FCC NoteFor business users in the European Union Important Safety Instructions Contents Precautions for use When controlling the AW-PH350 from the AW-RP400 IntroductionFront panel  Power LED PowerMajor operating controls and their functions  Transmission Status LED CommunicateRear panel  Controller connector Controller Pan/tilt head connector PAN-TILT Head  DC 12 V input connector DC12V  Cable clampConnections When controlling AW-PH400 from AW-RP605A AW-RP605 Protocol converterWhen controlling AW-PH400 from AW-RP555 AW-IF400GWhen controlling AW-PH400 from AW-RP655 AW-RP655Protocol converterWhen controlling AW-PH350 from AW-RP400 When controlling AW-PH360 from AW-RP400 Tracing memory function is not availableWhen controlling AW-PH650 from AW-RP400 When using the extended distance transmission function AW-RP400 and AW-PH400Tracing memory function is available Appearance Specifications 20 E 松下電器産業株式会社 ブロードメディア本部