Panasonic AW-IF400G manual  DC 12 V input connector DC12V,  Cable clamp

Major operating controls and their functions

ENGLISH

Function Switches [SW1, SW2, SET UP] (Factory defaults: SW1 = OFF, SW2 = OFF, SET UP No.1 = ON, SET UP No.2 to 4 = OFF)

This is used to select the operations of the AW-IF400. Before changing a setting, the power must be turned off. SETUP No.3 is the tilt range selector switch which is used to control the AW-PH400 from the AW-RP605A.

At the ON position, the range is 300 degrees; at the OFF position, it is 190 degrees. For any other combination, use the switch at the OFF position.

DC 12 V input connector [DC12V IN]

Connect the AW-PS505A AC adapter (sold separately) to this socket.

Cable clamp

This is used to clamp the power cable in place and prevent it from coming loose.

	SW1	SW2			SET UP
Functions			No.1	No.2	No.3			No.4
		MODE SET			TILT RANGE			NOT USE
Controlling PH400 from RP605A	OFF	OFF	ON	OFF	ON		OFF	OFF
					(300 deg)	(190 deg)
Extending communication distance	ON	ON	OFF	OFF	OFF			OFF
between RP400 and PH400					(Set at RP400)
Controlling PH350 from RP400	OFF	ON	OFF	ON	OFF			OFF

- 8 (E) -