Installing the Software | Dymo TESA2 -2401000 specs

2. Installing the Software

NOTE Do not connect the printer to your computer until instructed to do so during the software installation.

1Insert the LabelWriter CD into your CD-ROM drive. After a few seconds, the installation screen appears. If the installation screen does not appear:

a.Click Start and then Run on the Windows taskbar. The Run dialog box appears.

b.Enter D:\install.exe (where D is the letter assigned to the CD-ROM drive) and click OK.

2Select the language version you wish to install and then follow the on-screen instructions.

1Insert the DYMO LabelWriter CD into the CD-ROM drive.

After a few seconds, the DYMO Label Software Installer icon appears. See Figure 3.

2Double-click the Installer icon and then follow the on-screen instructions.

DYMO Label

Software Installer

Figure 3