To connect using the serial port
1Plug the serial cable into the serial port on the bottom of the printer. See Figure 7.
2Insert the power and serial cables into the cable channel and set the printer down on your work surface.
3When prompted during the software installation and while the printer is turned on, plug the serial connector into the serial (COM) port on your computer. See Figure 8.
The installation automatically continues when the system detects the LabelWriter printer.
4.Loading Labels
1Press the
2Open the top cover and remove the label spool.
3Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath.
4Place the spool guide on the right side of the
spool and adjust it to fit snugly against the roll. 
See Figure 9.
5Insert the label spool into the slots in the printer cover.
Serial | Power |
Connection |
|
Cable |
|
Channel |
|
Figure 7
Serial Port
Figure 8
Figure 9
5