Dymo SE450 quick start Align labels against left edge

Page 9

6Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 7.

7Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot.

The printer automatically feeds the label, stopping at the beginning of the first label.

If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button on the front of the printer.

If the first label on the roll is not a full label, press the form-feed button to eject the partial label.

8Carefully lower the top cover.

Align labels against left edge

Figure 7

7

Image 9
Contents LabelWriter SE450 Page Unpacking the Printer Quick Start GuideUSB Installing as a Serial Ascii Printer Windows Installing as a USB Connected Printer USB Loading Labels Align labels against left edge Cups SDK More InformationPage Distributed by DYMO, Atlanta, GA Sanford, L.P 1771221 05/10
Related manuals
Manual 29 pages 39 b