4. Loading Labels
The LabelWriter Duo printer prints two types of labels:
Important!
In order for the labels to feed properly during printing, pay attention to the following when loading labels on the spool and into the printer:
•The label spool guide must be pushed flush against the label roll, with no gap. See Figure 6.
•The labels must be loaded with the left edge of the label inserted against the left edge of the label feed slot. See Figure 8.
To load a label roll
1Press the
2Open the top cover and remove any packing material inside the label compartment.
3Remove the label spool from inside the top cover and pull the spool guide from the spindle.
SpoolSpool
spindle guide
Figure 5
4Hold the spool spindle in your left hand and place the label roll on the
spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. See Figure 5.
5