To load a label cassette
1Press the button on the front of the printer to open the label cassette tray.
NOTE The first time you use the printer, remove the protective cardboard insert from the label exit slot. See Figure 9.
2Make sure the label and ribbon are taut across the mouth of the cassette and that the label passes between the label guides.
If necessary, turn the ribbon rewind spool clockwise to tighten the ribbon.
3Insert the cassette and press firmly until the cassette clicks into place. Make sure label and ribbon are positioned correctly. See Figure 10.
4Press the button on the front of the printer to close the label cassette tray.
Remove cardboard insert
Figure 9
Push down gently
Figure 10
7